npu-group-effective-scope { 0 | 1 | 2 | 3 | 255}

On a FortiGate unit with NP7 processor groups (also called NP groups or NPU groups), for example the FortiGate 4800F or 4801F, you can use the following command to select an NP7 processor group. When you have selected an NP7 processor group, diagnose commands for NP7 processors (for example, diagnose npu session stat verbose) will only display or purge information for the NP7 processors in the NP7 processor group that you select with this command.

config system npu

set npu-group-effective-scope { 0 | 1 | 2 | 3 | 255}

end

The FortiGate 4800F or 4801F has four NP7 groups: 0, 1, 2 and 3. 255 (the default) sets the effective scope to all NP7 groups. For more information on FortiGate 4800F and 4801F NP groups, see Assigning an NP7 processor group to a hyperscale firewall VDOM.

Most FortiGates only have one NP7 group and changing the npu-group-effective-scope has no effect.