Fortinet black logo

Hyperscale Firewall Guide

SNMP queries for hardware session counts

SNMP queries for hardware session counts

You can use the following MIB fields to send SNMP queries for NP7 IPv4 and IPv6 hardware session counts and session setup rates.

The session rate information depends on the hardware logging configuration:

  • If hardware logging is set to use the NP7 processors for logging, the IPv4 and IPv6 session counts and session setup rates will both be a total of the IPv4 and IPv6 rates and appear to be the same in SNMP queries.

  • If hardware logging is set to use the FortiGate CPUs, the IPv4 and IPv6 rates will be correct.

Path:FORTINET-FORTIGATE-MIB:fortinet.fnFortiGateMib.fgSystem.fgSystemInfo
OID: 1.3.6.1.4.1.12356.101.4.1

Index

MIB field

Description

.24

fgSysNpuSesCount

NP7 IPv4 and IPv6 session count.

.25

fgSysNpuSesRate1

NP7 IPv4 session setup rate in the last 1 minute.

.26

fgSysNpuSesRate10

NP7 IPv4 session setup rate in the last 10 minutes.

.27

fgSysNpuSesRate30

NP7 IPv4 session setup rate in the last 30 minutes.

.28

fgSysNpuSesRate60

NP7 IPv4 session setup rate in the last 60 minutes.

.29

fgSysNpuSes6Count

NP7 IPv6 session count.

.30

fgSysNpuSes6Rate1

NP7 IPv6 session setup rate in the last 1 minute.

.31

fgSysNpuSes6Rate10

NP7 IPv6 session setup rate in the last 10 minutes.

.32

fgSysNpuSes6Rate30

NP7 IPv6 session setup rate in the last 30 minutes.

.33

fgSysNpuSes6Rate60

NP7 IPv6 session setup rate in the last 60 minutes.

SNMP queries for hardware session counts

You can use the following MIB fields to send SNMP queries for NP7 IPv4 and IPv6 hardware session counts and session setup rates.

The session rate information depends on the hardware logging configuration:

  • If hardware logging is set to use the NP7 processors for logging, the IPv4 and IPv6 session counts and session setup rates will both be a total of the IPv4 and IPv6 rates and appear to be the same in SNMP queries.

  • If hardware logging is set to use the FortiGate CPUs, the IPv4 and IPv6 rates will be correct.

Path:FORTINET-FORTIGATE-MIB:fortinet.fnFortiGateMib.fgSystem.fgSystemInfo
OID: 1.3.6.1.4.1.12356.101.4.1

Index

MIB field

Description

.24

fgSysNpuSesCount

NP7 IPv4 and IPv6 session count.

.25

fgSysNpuSesRate1

NP7 IPv4 session setup rate in the last 1 minute.

.26

fgSysNpuSesRate10

NP7 IPv4 session setup rate in the last 10 minutes.

.27

fgSysNpuSesRate30

NP7 IPv4 session setup rate in the last 30 minutes.

.28

fgSysNpuSesRate60

NP7 IPv4 session setup rate in the last 60 minutes.

.29

fgSysNpuSes6Count

NP7 IPv6 session count.

.30

fgSysNpuSes6Rate1

NP7 IPv6 session setup rate in the last 1 minute.

.31

fgSysNpuSes6Rate10

NP7 IPv6 session setup rate in the last 10 minutes.

.32

fgSysNpuSes6Rate30

NP7 IPv6 session setup rate in the last 30 minutes.

.33

fgSysNpuSes6Rate60

NP7 IPv6 session setup rate in the last 60 minutes.