Fortinet black logo

Hardware Acceleration

Confirm that the traffic is accelerated

Confirm that the traffic is accelerated

Use the following diagnose commands to obtain the interface index and then correlate them with the session entries. In the following example traffic was flowing between new accelerated inter-VDOM link interfaces and physical interfaces port1 and port 2 also attached to the NP6 processor.

diagnose ip address list

IP=172.31.17.76->172.31.17.76/255.255.252.0 index=5 devname=port1

IP=10.74.1.76->10.74.1.76/255.255.252.0 index=6 devname=port2

IP=172.20.120.12->172.20.120.12/255.255.255.0 index=55 devname=IVL-VLAN1_ROOT

IP=172.20.120.22->172.20.120.22/255.255.255.0 index=56 devname=IVL-VLAN1_VDOM1

diagnose sys session list

session info: proto=1 proto_state=00 duration=282 expire=24 timeout=0 session info: proto=1 proto_state=00 duration=124 expire=59 timeout=0 flags=00000000 sockflag=00000000 sockport=0 av_idx=0 use=3

origin-shaper=

reply-shaper=

per_ip_shaper=

ha_id=0 policy_dir=0 tunnel=/

state=may_dirty npu

statistic(bytes/packets/allow_err): org=180/3/1 reply=120/2/1 tuples=2

orgin->sink: org pre->post, reply pre->post dev=55->5/5->55 gwy=172.31.19.254/172.20.120.22

hook=post dir=org act=snat 10.74.2.87:768->10.2.2.2:8(172.31.17.76:62464)

hook=pre dir=reply act=dnat 10.2.2.2:62464->172.31.17.76:0(10.74.2.87:768)

misc=0 policy_id=4 id_policy_id=0 auth_info=0 chk_client_info=0 vd=0

serial=0000004e tos=ff/ff ips_view=0 app_list=0 app=0

dd_type=0 dd_mode=0

per_ip_bandwidth meter: addr=10.74.2.87, bps=880

npu_state=00000000

npu info: flag=0x81/0x81, offload=8/8, ips_offload=0/0, epid=160/218, ipid=218/160, vlan=32769/0

session info: proto=1 proto_state=00 duration=124 expire=20 timeout=0 flags=00000000 sockflag=00000000 sockport=0 av_idx=0 use=3

origin-shaper=

reply-shaper=

per_ip_shaper=

ha_id=0 policy_dir=0 tunnel=/

state=may_dirty npu

statistic(bytes/packets/allow_err): org=180/3/1 reply=120/2/1 tuples=2

orgin->sink: org pre->post, reply pre->post dev=6->56/56->6 gwy=172.20.120.12/10.74.2.87

hook=pre dir=org act=noop 10.74.2.87:768->10.2.2.2:8(0.0.0.0:0)

hook=post dir=reply act=noop 10.2.2.2:768->10.74.2.87:0(0.0.0.0:0)

misc=0 policy_id=3 id_policy_id=0 auth_info=0 chk_client_info=0 vd=1

serial=0000004d tos=ff/ff ips_view=0 app_list=0 app=0

dd_type=0 dd_mode=0

per_ip_bandwidth meter: addr=10.74.2.87, bps=880

npu_state=00000000

npu info: flag=0x81/0x81, offload=8/8, ips_offload=0/0, epid=219/161, ipid=161/219, vlan=0/32769

total session 2

Confirm that the traffic is accelerated

Use the following diagnose commands to obtain the interface index and then correlate them with the session entries. In the following example traffic was flowing between new accelerated inter-VDOM link interfaces and physical interfaces port1 and port 2 also attached to the NP6 processor.

diagnose ip address list

IP=172.31.17.76->172.31.17.76/255.255.252.0 index=5 devname=port1

IP=10.74.1.76->10.74.1.76/255.255.252.0 index=6 devname=port2

IP=172.20.120.12->172.20.120.12/255.255.255.0 index=55 devname=IVL-VLAN1_ROOT

IP=172.20.120.22->172.20.120.22/255.255.255.0 index=56 devname=IVL-VLAN1_VDOM1

diagnose sys session list

session info: proto=1 proto_state=00 duration=282 expire=24 timeout=0 session info: proto=1 proto_state=00 duration=124 expire=59 timeout=0 flags=00000000 sockflag=00000000 sockport=0 av_idx=0 use=3

origin-shaper=

reply-shaper=

per_ip_shaper=

ha_id=0 policy_dir=0 tunnel=/

state=may_dirty npu

statistic(bytes/packets/allow_err): org=180/3/1 reply=120/2/1 tuples=2

orgin->sink: org pre->post, reply pre->post dev=55->5/5->55 gwy=172.31.19.254/172.20.120.22

hook=post dir=org act=snat 10.74.2.87:768->10.2.2.2:8(172.31.17.76:62464)

hook=pre dir=reply act=dnat 10.2.2.2:62464->172.31.17.76:0(10.74.2.87:768)

misc=0 policy_id=4 id_policy_id=0 auth_info=0 chk_client_info=0 vd=0

serial=0000004e tos=ff/ff ips_view=0 app_list=0 app=0

dd_type=0 dd_mode=0

per_ip_bandwidth meter: addr=10.74.2.87, bps=880

npu_state=00000000

npu info: flag=0x81/0x81, offload=8/8, ips_offload=0/0, epid=160/218, ipid=218/160, vlan=32769/0

session info: proto=1 proto_state=00 duration=124 expire=20 timeout=0 flags=00000000 sockflag=00000000 sockport=0 av_idx=0 use=3

origin-shaper=

reply-shaper=

per_ip_shaper=

ha_id=0 policy_dir=0 tunnel=/

state=may_dirty npu

statistic(bytes/packets/allow_err): org=180/3/1 reply=120/2/1 tuples=2

orgin->sink: org pre->post, reply pre->post dev=6->56/56->6 gwy=172.20.120.12/10.74.2.87

hook=pre dir=org act=noop 10.74.2.87:768->10.2.2.2:8(0.0.0.0:0)

hook=post dir=reply act=noop 10.2.2.2:768->10.74.2.87:0(0.0.0.0:0)

misc=0 policy_id=3 id_policy_id=0 auth_info=0 chk_client_info=0 vd=1

serial=0000004d tos=ff/ff ips_view=0 app_list=0 app=0

dd_type=0 dd_mode=0

per_ip_bandwidth meter: addr=10.74.2.87, bps=880

npu_state=00000000

npu info: flag=0x81/0x81, offload=8/8, ips_offload=0/0, epid=219/161, ipid=161/219, vlan=0/32769

total session 2