Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:


Table of Contents

Hardware Acceleration

diagnose npu np6xlite npu-feature (verify enabled NP6Lite features)

You can use the diagnose npu np6xlite npu-feature command to see the NP6XLite features that are enabled on your FortiGate and those that are not.

The following command output, from a FortiGate 60F, shows the default NP6XLite configuration for most FortiGates with NP6XLite processors:

diagnose npu np6xlite npu-feature 
                    np_0      
------------------- --------- 
Fastpath            Enabled   
HPE-type-shaping    Disabled  
IPv4 firewall       Yes       
IPv6 firewall       Yes       
IPv4 IPSec          Yes       
IPv6 IPSec          Yes       
IPv4 tunnel         Yes       
IPv6 tunnel         Yes       
GRE passthrough     Yes       
IPv4 Multicast      Yes       
IPv6 Multicast      Yes       
CAPWAP              Yes       

If you use the following commands to disable fastpath:

config system np6xlite

edit np6xlite_0

set fastpath disable

end

The npu-feature command output show this configuration change:

diagnose npu np6xlite npu-feature
                    np_0      
------------------- --------- 
Fastpath            Disabled  
HPE-type-shaping    Disabled  
IPv4 firewall       Yes       
IPv6 firewall       Yes       
IPv4 IPSec          Yes       
IPv6 IPSec          Yes       
IPv4 tunnel         Yes       
IPv6 tunnel         Yes       
GRE passthrough     Yes       
IPv4 Multicast      Yes       
IPv6 Multicast      Yes       
CAPWAP              Yes       

diagnose npu np6xlite npu-feature (verify enabled NP6Lite features)

You can use the diagnose npu np6xlite npu-feature command to see the NP6XLite features that are enabled on your FortiGate and those that are not.

The following command output, from a FortiGate 60F, shows the default NP6XLite configuration for most FortiGates with NP6XLite processors:

diagnose npu np6xlite npu-feature 
                    np_0      
------------------- --------- 
Fastpath            Enabled   
HPE-type-shaping    Disabled  
IPv4 firewall       Yes       
IPv6 firewall       Yes       
IPv4 IPSec          Yes       
IPv6 IPSec          Yes       
IPv4 tunnel         Yes       
IPv6 tunnel         Yes       
GRE passthrough     Yes       
IPv4 Multicast      Yes       
IPv6 Multicast      Yes       
CAPWAP              Yes       

If you use the following commands to disable fastpath:

config system np6xlite

edit np6xlite_0

set fastpath disable

end

The npu-feature command output show this configuration change:

diagnose npu np6xlite npu-feature
                    np_0      
------------------- --------- 
Fastpath            Disabled  
HPE-type-shaping    Disabled  
IPv4 firewall       Yes       
IPv6 firewall       Yes       
IPv4 IPSec          Yes       
IPv6 IPSec          Yes       
IPv4 tunnel         Yes       
IPv6 tunnel         Yes       
GRE passthrough     Yes       
IPv4 Multicast      Yes       
IPv6 Multicast      Yes       
CAPWAP              Yes