Version:

Version:


Table of Contents

New Features

Download PDF
Copy Link

Add IoT devices to Asset Identity Center page 7.2.1

IoT device information is added to the Security Fabric > Asset Identity Center page, including the device name, software OS, hardware vendor, status, IP address, hostname, time last seen, port, VLAN, and so on.

The following are required for IoT devices to be displayed on the Asset Identity Center page:

  1. The FortiGate must have a valid IoT Detection Service license (see Signature packages for IoT device detection).

  2. Device detection must be configured on a LAN interface used by IoT devices.

    To configure device detection in the GUI:
    1. Go to Network > Interfaces and edit a LAN interface.
    2. Enable Device detection.
    3. Click OK.
    To configure device detection in the CLI:
    config system interface
        edit <name>
            set device-identification enable
        next
    end
  3. Configure a firewall policy with an application control sensor.

Add IoT devices to Asset Identity Center page 7.2.1

IoT device information is added to the Security Fabric > Asset Identity Center page, including the device name, software OS, hardware vendor, status, IP address, hostname, time last seen, port, VLAN, and so on.

The following are required for IoT devices to be displayed on the Asset Identity Center page:

  1. The FortiGate must have a valid IoT Detection Service license (see Signature packages for IoT device detection).

  2. Device detection must be configured on a LAN interface used by IoT devices.

    To configure device detection in the GUI:
    1. Go to Network > Interfaces and edit a LAN interface.
    2. Enable Device detection.
    3. Click OK.
    To configure device detection in the CLI:
    config system interface
        edit <name>
            set device-identification enable
        next
    end
  3. Configure a firewall policy with an application control sensor.