Add IoT devices to Asset Identity Center page 7.2.1
IoT device information is added to the Security Fabric > Asset Identity Center page, including the device name, software OS, hardware vendor, status, IP address, hostname, time last seen, port, VLAN, and so on.
The following are required for IoT devices to be displayed on the Asset Identity Center page:
-
The FortiGate must have a valid IoT Detection Service license.
-
Device detection must be configured on a LAN interface used by IoT devices.
To configure device detection in the GUI:
- Go to Network > Interfaces and edit a LAN interface.
- Enable Device detection.
- Click OK.
To configure device detection in the CLI:
config system interface edit <name> set device-identification enable next end
-
Configure a firewall policy with an application control sensor.