config router isis

Configure IS-IS.

config router isis

Description: Configure IS-IS.

set is-type [level-1-2|level-1|...]

set adv-passive-only [enable|disable]

set adv-passive-only6 [enable|disable]

set auth-mode-l1 [password|md5]

set auth-mode-l2 [password|md5]

set auth-password-l1 {password}

set auth-password-l2 {password}

set auth-keychain-l1 {string}

set auth-keychain-l2 {string}

set auth-sendonly-l1 [enable|disable]

set auth-sendonly-l2 [enable|disable]

set ignore-lsp-errors [enable|disable]

set lsp-gen-interval-l1 {integer}

set lsp-gen-interval-l2 {integer}

set lsp-refresh-interval {integer}

set max-lsp-lifetime {integer}

set spf-interval-exp-l1 {user}

set spf-interval-exp-l2 {user}

set dynamic-hostname [enable|disable]

set adjacency-check [enable|disable]

set adjacency-check6 [enable|disable]

set overload-bit [enable|disable]

set overload-bit-suppress {option1}, {option2}, ...

set overload-bit-on-startup {integer}

set default-originate [enable|disable]

set default-originate6 [enable|disable]

set metric-style [narrow|wide|...]

set redistribute-l1 [enable|disable]

set redistribute-l1-list {string}

set redistribute-l2 [enable|disable]

set redistribute-l2-list {string}

set redistribute6-l1 [enable|disable]

set redistribute6-l1-list {string}

set redistribute6-l2 [enable|disable]

set redistribute6-l2-list {string}

config isis-net

Description: IS-IS net configuration.

edit <id>

set net {user}

next

end

config isis-interface

Description: IS-IS interface configuration.

edit <name>

set status [enable|disable]

set status6 [enable|disable]

set network-type [broadcast|point-to-point|...]

set circuit-type [level-1-2|level-1|...]

set csnp-interval-l1 {integer}

set csnp-interval-l2 {integer}

set hello-interval-l1 {integer}

set hello-interval-l2 {integer}

set hello-multiplier-l1 {integer}

set hello-multiplier-l2 {integer}

set hello-padding [enable|disable]

set lsp-interval {integer}

set lsp-retransmit-interval {integer}

set metric-l1 {integer}

set metric-l2 {integer}

set wide-metric-l1 {integer}

set wide-metric-l2 {integer}

set auth-password-l1 {password}

set auth-password-l2 {password}

set auth-keychain-l1 {string}

set auth-keychain-l2 {string}

set auth-send-only-l1 [enable|disable]

set auth-send-only-l2 [enable|disable]

set auth-mode-l1 [md5|password]

set auth-mode-l2 [md5|password]

set priority-l1 {integer}

set priority-l2 {integer}

set mesh-group [enable|disable]

set mesh-group-id {integer}

next

end

config summary-address

Description: IS-IS summary addresses.

edit <id>

set prefix {ipv4-classnet-any}

set level [level-1-2|level-1|...]

next

end

config summary-address6

Description: IS-IS IPv6 summary address.

edit <id>

set prefix6 {ipv6-prefix}

set level [level-1-2|level-1|...]

next

end

config redistribute

Description: IS-IS redistribute protocols.

edit <protocol>

set status [enable|disable]

set metric {integer}

set metric-type [external|internal]

set level [level-1-2|level-1|...]

set routemap {string}

next

end

config redistribute6

Description: IS-IS IPv6 redistribution for routing protocols.

edit <protocol>

set status [enable|disable]

set metric {integer}

set metric-type [external|internal]

set level [level-1-2|level-1|...]

set routemap {string}

next

end

end

config router isis

Parameter	Description	Type	Size	Default
is-type	IS type.	option	-	level-1-2
	Option Description level-1-2 Level 1 and 2. level-1 Level 1 only. level-2-only Level 2 only.
adv-passive-only	Enable/disable IS-IS advertisement of passive interfaces only.	option	-	disable
	Option Description enable Advertise passive interfaces only. disable Advertise all IS-IS enabled interfaces.
adv-passive-only6	Enable/disable IPv6 IS-IS advertisement of passive interfaces only.	option	-	disable
	Option Description enable Advertise passive interfaces only. disable Advertise all IS-IS enabled interfaces.
auth-mode-l1	Level 1 authentication mode.	option	-	password
	Option Description password Password. md5 MD5.
auth-mode-l2	Level 2 authentication mode.	option	-	password
	Option Description password Password. md5 MD5.
auth-password-l1	Authentication password for level 1 PDUs.	password	Not Specified
auth-password-l2	Authentication password for level 2 PDUs.	password	Not Specified
auth-keychain-l1	Authentication key-chain for level 1 PDUs.	string	Maximum length: 35
auth-keychain-l2	Authentication key-chain for level 2 PDUs.	string	Maximum length: 35
auth-sendonly-l1	Enable/disable level 1 authentication send-only.	option	-	disable
	Option Description enable Enable level 1 authentication send-only. disable Disable level 1 authentication send-only.
auth-sendonly-l2	Enable/disable level 2 authentication send-only.	option	-	disable
	Option Description enable Enable level 2 authentication send-only. disable Disable level 2 authentication send-only.
ignore-lsp-errors	Enable/disable ignoring of LSP errors with bad checksums.	option	-	disable
	Option Description enable Enable ignoring of LSP errors with bad checksums. disable Disable ignoring of LSP errors with bad checksums.
lsp-gen-interval-l1	Minimum interval for level 1 LSP regenerating.	integer	Minimum value: 1 Maximum value: 120	30
lsp-gen-interval-l2	Minimum interval for level 2 LSP regenerating.	integer	Minimum value: 1 Maximum value: 120	30
lsp-refresh-interval	LSP refresh time in seconds.	integer	Minimum value: 1 Maximum value: 65535	900
max-lsp-lifetime	Maximum LSP lifetime in seconds.	integer	Minimum value: 350 Maximum value: 65535	1200
spf-interval-exp-l1	Level 1 SPF calculation delay.	user	Not Specified
spf-interval-exp-l2	Level 2 SPF calculation delay.	user	Not Specified
dynamic-hostname	Enable/disable dynamic hostname.	option	-	disable
	Option Description enable Enable dynamic hostname. disable Disable dynamic hostname.
adjacency-check	Enable/disable adjacency check.	option	-	disable
	Option Description enable Enable adjacency check. disable Disable adjacency check.
adjacency-check6	Enable/disable IPv6 adjacency check.	option	-	disable
	Option Description enable Enable IPv6 adjacency check. disable Disable IPv6 adjacency check.
overload-bit	Enable/disable signal other routers not to use us in SPF.	option	-	disable
	Option Description enable Enable overload bit. disable Disable overload bit.
overload-bit-suppress	Suppress overload-bit for the specific prefixes.	option	-
	Option Description external External. interlevel Inter-level.
overload-bit-on-startup	Overload-bit only temporarily after reboot.	integer	Minimum value: 5 Maximum value: 86400	0
default-originate	Enable/disable distribution of default route information.	option	-	disable
	Option Description enable Enable distribution of default route information. disable Disable distribution of default route information.
default-originate6	Enable/disable distribution of default IPv6 route information.	option	-	disable
	Option Description enable Enable distribution of default IPv6 route information. disable Disable distribution of default IPv6 route information.
metric-style	Use old-style (ISO 10589) or new-style packet formats.	option	-	narrow
	Option Description narrow Use old style of TLVs with narrow metric. wide Use new style of TLVs to carry wider metric. transition Send and accept both styles of TLVs during transition. narrow-transition Narrow and accept both styles of TLVs during transition. narrow-transition-l1 Narrow-transition level-1 only. narrow-transition-l2 Narrow-transition level-2 only. wide-l1 Wide level-1 only. wide-l2 Wide level-2 only. wide-transition Wide and accept both styles of TLVs during transition. wide-transition-l1 Wide-transition level-1 only. wide-transition-l2 Wide-transition level-2 only. transition-l1 Transition level-1 only. transition-l2 Transition level-2 only.
redistribute-l1	Enable/disable redistribution of level 1 routes into level 2.	option	-	disable
	Option Description enable Enable redistribution of level 1 routes into level 2. disable Disable redistribution of level 1 routes into level 2.
redistribute-l1-list	Access-list for route redistribution from l1 to l2.	string	Maximum length: 35
redistribute-l2	Enable/disable redistribution of level 2 routes into level 1.	option	-	disable
	Option Description enable Enable redistribution of level 2 routes into level 1. disable Disable redistribution of level 2 routes into level 1.
redistribute-l2-list	Access-list for route redistribution from l2 to l1.	string	Maximum length: 35
redistribute6-l1	Enable/disable redistribution of level 1 IPv6 routes into level 2.	option	-	disable
	Option Description enable Enable redistribution of level 1 IPv6 routes into level 2. disable Disable redistribution of level 1 IPv6 routes into level 2.
redistribute6-l1-list	Access-list for IPv6 route redistribution from l1 to l2.	string	Maximum length: 35
redistribute6-l2	Enable/disable redistribution of level 2 IPv6 routes into level 1.	option	-	disable
	Option Description enable Enable redistribution of level 2 IPv6 routes into level 1. disable Disable redistribution of level 2 IPv6 routes into level 1.
redistribute6-l2-list	Access-list for IPv6 route redistribution from l2 to l1.	string	Maximum length: 35

config isis-net

Parameter	Description	Type	Size	Default
net	IS-IS networks (format = xx.xxxx. .xxxx.xx.).	user	Not Specified

config isis-interface

Parameter	Description	Type	Size	Default
status	Enable/disable interface for IS-IS.	option	-	disable
	Option Description enable Enable interface for IS-IS. disable Disable interface for IS-IS.
status6	Enable/disable IPv6 interface for IS-IS.	option	-	disable
	Option Description enable Enable IPv6 interface for IS-IS. disable Disable IPv6 interface for IS-IS.
network-type	IS-IS interface's network type.	option	-
	Option Description broadcast Broadcast. point-to-point Point-to-point. loopback Loopback.
circuit-type	IS-IS interface's circuit type.	option	-	level-1-2
	Option Description level-1-2 Level 1 and 2. level-1 Level 1. level-2 Level 2.
csnp-interval-l1	Level 1 CSNP interval.	integer	Minimum value: 1 Maximum value: 65535	10
csnp-interval-l2	Level 2 CSNP interval.	integer	Minimum value: 1 Maximum value: 65535	10
hello-interval-l1	Level 1 hello interval.	integer	Minimum value: 0 Maximum value: 65535	10
hello-interval-l2	Level 2 hello interval.	integer	Minimum value: 0 Maximum value: 65535	10
hello-multiplier-l1	Level 1 multiplier for Hello holding time.	integer	Minimum value: 2 Maximum value: 100	3
hello-multiplier-l2	Level 2 multiplier for Hello holding time.	integer	Minimum value: 2 Maximum value: 100	3
hello-padding	Enable/disable padding to IS-IS hello packets.	option	-	enable
	Option Description enable Enable padding to IS-IS hello packets. disable Disable padding to IS-IS hello packets.
lsp-interval	LSP transmission interval (milliseconds).	integer	Minimum value: 1 Maximum value: 4294967295	33
lsp-retransmit-interval	LSP retransmission interval (sec).	integer	Minimum value: 1 Maximum value: 65535	5
metric-l1	Level 1 metric for interface.	integer	Minimum value: 1 Maximum value: 63	10
metric-l2	Level 2 metric for interface.	integer	Minimum value: 1 Maximum value: 63	10
wide-metric-l1	Level 1 wide metric for interface.	integer	Minimum value: 1 Maximum value: 16777214	10
wide-metric-l2	Level 2 wide metric for interface.	integer	Minimum value: 1 Maximum value: 16777214	10
auth-password-l1	Authentication password for level 1 PDUs.	password	Not Specified
auth-password-l2	Authentication password for level 2 PDUs.	password	Not Specified
auth-keychain-l1	Authentication key-chain for level 1 PDUs.	string	Maximum length: 35
auth-keychain-l2	Authentication key-chain for level 2 PDUs.	string	Maximum length: 35
auth-send-only-l1	Enable/disable authentication send-only for level 1 PDUs.	option	-	disable
	Option Description enable