Fortinet black logo

Hardware Acceleration

diagnose npu np6 npu-feature (verify enabled NP6 features)

diagnose npu np6 npu-feature (verify enabled NP6 features)

You can use the diagnose npu np6 npu-feature command to see the NP6 features that are enabled on your FortiGate and those that are not.

The following command output, from a FortiGate 1500D, shows the default NP6 configuration for most FortiGates with NP6 processors:

diagnose npu np6 npu-feature 
                    np_0      np_1      
------------------- --------- --------- 
Fastpath            Enabled   Enabled   
HPE-type-shaping    Disabled  Disabled  
Standalone          No        No        
IPv4 firewall       Yes       Yes       
IPv6 firewall       Yes       Yes       
IPv4 IPSec          Yes       Yes       
IPv6 IPSec          Yes       Yes       
IPv4 tunnel         Yes       Yes       
IPv6 tunnel         Yes       Yes       
GRE tunnel          No        No        
GRE passthrough     Yes       Yes       
IPv4 Multicast      Yes       Yes       
IPv6 Multicast      Yes       Yes       
CAPWAP              Yes       Yes       
RDP Offload         Yes       Yes            

If you use the following command to disable fastpath:

config system npu

set fastpath disable

end

The npu-feature command output shows this configuration change:

diagnose npu np6 npu-feature 
                    np_0      np_1      
------------------- --------- --------- 
Fastpath            Disabled  Disabled   
HPE-type-shaping    Disabled  Disabled  
Standalone          No        No        
IPv4 firewall       Yes       Yes       
IPv6 firewall       Yes       Yes       
IPv4 IPSec          Yes       Yes       
IPv6 IPSec          Yes       Yes       
IPv4 tunnel         Yes       Yes       
IPv6 tunnel         Yes       Yes       
GRE tunnel          No        No        
GRE passthrough     Yes       Yes       
IPv4 Multicast      Yes       Yes       
IPv6 Multicast      Yes       Yes       
CAPWAP              Yes       Yes       
RDP Offload         Yes       Yes    

diagnose npu np6 npu-feature (verify enabled NP6 features)

You can use the diagnose npu np6 npu-feature command to see the NP6 features that are enabled on your FortiGate and those that are not.

The following command output, from a FortiGate 1500D, shows the default NP6 configuration for most FortiGates with NP6 processors:

diagnose npu np6 npu-feature 
                    np_0      np_1      
------------------- --------- --------- 
Fastpath            Enabled   Enabled   
HPE-type-shaping    Disabled  Disabled  
Standalone          No        No        
IPv4 firewall       Yes       Yes       
IPv6 firewall       Yes       Yes       
IPv4 IPSec          Yes       Yes       
IPv6 IPSec          Yes       Yes       
IPv4 tunnel         Yes       Yes       
IPv6 tunnel         Yes       Yes       
GRE tunnel          No        No        
GRE passthrough     Yes       Yes       
IPv4 Multicast      Yes       Yes       
IPv6 Multicast      Yes       Yes       
CAPWAP              Yes       Yes       
RDP Offload         Yes       Yes            

If you use the following command to disable fastpath:

config system npu

set fastpath disable

end

The npu-feature command output shows this configuration change:

diagnose npu np6 npu-feature 
                    np_0      np_1      
------------------- --------- --------- 
Fastpath            Disabled  Disabled   
HPE-type-shaping    Disabled  Disabled  
Standalone          No        No        
IPv4 firewall       Yes       Yes       
IPv6 firewall       Yes       Yes       
IPv4 IPSec          Yes       Yes       
IPv6 IPSec          Yes       Yes       
IPv4 tunnel         Yes       Yes       
IPv6 tunnel         Yes       Yes       
GRE tunnel          No        No        
GRE passthrough     Yes       Yes       
IPv4 Multicast      Yes       Yes       
IPv6 Multicast      Yes       Yes       
CAPWAP              Yes       Yes       
RDP Offload         Yes       Yes