Version:

Version:

Version:


Table of Contents

Hyperscale Firewall Guide

Download PDF
Copy Link

Setting the NP7 TCP reset timeout

You can use the following command to adjust the NP7 TCP reset timeout

config system npu

tcp-rst-timeout <timeout>

end

The NP7 TCP reset (RST) timeout in seconds. The range is 0-16777215. The default timeout is 5 seconds. The default timeout is optimal in most cases, especially when hyperscale firewall is enabled. A timeout of 0 means no time out.

Setting the NP7 TCP reset timeout

You can use the following command to adjust the NP7 TCP reset timeout

config system npu

tcp-rst-timeout <timeout>

end

The NP7 TCP reset (RST) timeout in seconds. The range is 0-16777215. The default timeout is 5 seconds. The default timeout is optimal in most cases, especially when hyperscale firewall is enabled. A timeout of 0 means no time out.