Only host hardware logging supports adding event logs to hardware log messages. As well, event log messages are only supported when the log mode is set to per NAT mapping. Per NAT mapping creates two log messages per session, one when the session allocates NAT mapping resources and one when NAT mapping resources are freed when the session ends.
CLI syntax to add event logs to hardware logging. Enable
log-gen-event to add event logs to hardware logging. This option is only available if
log-format is set to
log-mode is set to
per-nat-mapping to reduce the number of log messages generated.
config log npu-server
set log-processor host
set log-mode per-nat-mapping
set log-format syslog
set log-gen-event enable