Version:

Version:

Version:


Table of Contents

Hyperscale Firewall Guide

Download PDF
Copy Link

Displaying IP pool usage

Use the diagnose firewall ippool list command to show general IP pool usage for CGNAT IP pools.

Command syntax:

diagnose firewall ippool list [{pba | nat-ip | user}]

List details for all IP pools:

diagnose firewall ippool list
list ippool info:(vf=cgn-hw1)
ippool test-cgn-pba-1: id=1, block-sz=64, num-block=8, fixed-port=no, use=4
        ip-range=172.16.201.181-172.16.201.182 start-port=5117, num-pba-per-ip=944
        clients=1, inuse-NAT-IPs=1
        total-PBAs=1888, inuse-PBAs=1, expiring-PBAs=0, free-PBAs=99.95%
        allocate-PBA-times=1, reuse-PBA-times=0
        grp=N/A, start-port=8117, end-port=8629
        npu-clients=1, npu-inuse-NAT-IPs=1, total-NAT-IP=2
        npu-total-PBAs=16, npu-inuse-PBAs=4/0, npu-free-PBAs=75.00%/100.00%
        npu-tcp-sess-count=256, npu-udp-sess-count=0
ippool test-cgn-opba-1: id=2, block-sz=256, num-block=8, fixed-port=no, use=2
        ip-range=172.16.201.183-172.16.201.184 start-port=5117, num-pba-per-ip=236
        clients=0, inuse-NAT-IPs=0
        total-PBAs=472, inuse-PBAs=0, expiring-PBAs=0, free-PBAs=100.00%
        allocate-PBA-times=0, reuse-PBA-times=0
ippool test-cgn-spba-1: id=3, block-sz=128, num-block=8, fixed-port=no, use=2
        ip-range=172.16.201.185-172.16.201.186 start-port=5117, num-pba-per-ip=472
        clients=0, inuse-NAT-IPs=0
        total-PBAs=944, inuse-PBAs=0, expiring-PBAs=0, free-PBAs=100.00%
        allocate-PBA-times=0, reuse-PBA-times=0
...

List PBAs in IP pools:

diag firewall ippool list pba
user 10.1.100.200: 172.16.201.181 8117-8180, idx=0, use=1
user 10.1.100.200: 172.16.201.181 8181-8244, idx=1, use=1
user 10.1.100.200: 172.16.201.181 8245-8308, idx=2, use=1
user 10.1.100.200: 172.16.201.181 8309-8372, idx=3, use=1
Total pba in NP: 4

List allocated IP addresses in IP pools:

diag firewall ippool list nat-ip
NAT-IP 172.16.201.181: pba=8, use=4
Total nat-ip in NP: 1

List users of IP pools:

diag firewall ippool list user
User-IP 10.1.100.200: pba=4, use=1
Total user in NP: 1

Displaying IP pool usage

Use the diagnose firewall ippool list command to show general IP pool usage for CGNAT IP pools.

Command syntax:

diagnose firewall ippool list [{pba | nat-ip | user}]

List details for all IP pools:

diagnose firewall ippool list
list ippool info:(vf=cgn-hw1)
ippool test-cgn-pba-1: id=1, block-sz=64, num-block=8, fixed-port=no, use=4
        ip-range=172.16.201.181-172.16.201.182 start-port=5117, num-pba-per-ip=944
        clients=1, inuse-NAT-IPs=1
        total-PBAs=1888, inuse-PBAs=1, expiring-PBAs=0, free-PBAs=99.95%
        allocate-PBA-times=1, reuse-PBA-times=0
        grp=N/A, start-port=8117, end-port=8629
        npu-clients=1, npu-inuse-NAT-IPs=1, total-NAT-IP=2
        npu-total-PBAs=16, npu-inuse-PBAs=4/0, npu-free-PBAs=75.00%/100.00%
        npu-tcp-sess-count=256, npu-udp-sess-count=0
ippool test-cgn-opba-1: id=2, block-sz=256, num-block=8, fixed-port=no, use=2
        ip-range=172.16.201.183-172.16.201.184 start-port=5117, num-pba-per-ip=236
        clients=0, inuse-NAT-IPs=0
        total-PBAs=472, inuse-PBAs=0, expiring-PBAs=0, free-PBAs=100.00%
        allocate-PBA-times=0, reuse-PBA-times=0
ippool test-cgn-spba-1: id=3, block-sz=128, num-block=8, fixed-port=no, use=2
        ip-range=172.16.201.185-172.16.201.186 start-port=5117, num-pba-per-ip=472
        clients=0, inuse-NAT-IPs=0
        total-PBAs=944, inuse-PBAs=0, expiring-PBAs=0, free-PBAs=100.00%
        allocate-PBA-times=0, reuse-PBA-times=0
...

List PBAs in IP pools:

diag firewall ippool list pba
user 10.1.100.200: 172.16.201.181 8117-8180, idx=0, use=1
user 10.1.100.200: 172.16.201.181 8181-8244, idx=1, use=1
user 10.1.100.200: 172.16.201.181 8245-8308, idx=2, use=1
user 10.1.100.200: 172.16.201.181 8309-8372, idx=3, use=1
Total pba in NP: 4

List allocated IP addresses in IP pools:

diag firewall ippool list nat-ip
NAT-IP 172.16.201.181: pba=8, use=4
Total nat-ip in NP: 1

List users of IP pools:

diag firewall ippool list user
User-IP 10.1.100.200: pba=4, use=1
Total user in NP: 1