Fortinet Document Library

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:


Table of Contents

L2TP over IPsec configuration needs to be manually updated after upgrading from 6.4.x or 7.0.0 to 7.0.1

To make L2TP over IPsec work after upgrading:
  1. Add a static route for the IP range configured in vpn l2tp. For example, if the L2TP setting in the previous version's root VDOM is:

    config vpn l2tp
        set eip 210.0.0.254
        set sip 210.0.0.1
        set status enable
        set usrgrp "L2tpusergroup"
    end

    Add a static route after upgrading:

    config router static
        edit 1
            set dst 210.0.0.0 255.255.255.0
            set device "l2tp.root"
        next
    end
  2. Change the firewall policy source interface tunnel name to l2t.VDOM.

L2TP over IPsec configuration needs to be manually updated after upgrading from 6.4.x or 7.0.0 to 7.0.1

To make L2TP over IPsec work after upgrading:
  1. Add a static route for the IP range configured in vpn l2tp. For example, if the L2TP setting in the previous version's root VDOM is:

    config vpn l2tp
        set eip 210.0.0.254
        set sip 210.0.0.1
        set status enable
        set usrgrp "L2tpusergroup"
    end

    Add a static route after upgrading:

    config router static
        edit 1
            set dst 210.0.0.0 255.255.255.0
            set device "l2tp.root"
        next
    end
  2. Change the firewall policy source interface tunnel name to l2t.VDOM.