Fortinet Document Library

Version:

Version:

Version:

Version:

Version:


Table of Contents

Hardware Acceleration

diagnose npu np6lite npu-feature (verify enabled NP6Lite features)

You can use the diagnose npu np6lite npu-feature command to see the NP6Lite features that are enabled on your FortiGate and those that are not.

The following command output, from a FortiGate 200E, shows the default NP6Lite configuration for most FortiGates with NP6Lite processors:

diagnose npu np6lite npu-feature
                    np_0      np_1    
------------------- --------- --------- 
Fastpath            Enabled   Enabled   
IPv4 firewall       Yes       Yes       
IPv6 firewall       Yes       Yes       
IPv4 IPSec          Yes       Yes       
IPv6 IPSec          Yes       Yes       
IPv4 tunnel         Yes       Yes       
IPv6 tunnel         Yes       Yes       
GRE tunnel          No        No           

If you use the following command to disable fastpath:

config system npu

set fastpath disable

end

The npu-feature command output show this configuration change:

diagnose npu np6lite npu-feature
                    np_0      np_1    
------------------- --------- --------- 
Fastpath            Disabled  Disabled   
IPv4 firewall       Yes       Yes       
IPv6 firewall       Yes       Yes       
IPv4 IPSec          Yes       Yes       
IPv6 IPSec          Yes       Yes       
IPv4 tunnel         Yes       Yes       
IPv6 tunnel         Yes       Yes       
GRE tunnel          No        No      

diagnose npu np6lite npu-feature (verify enabled NP6Lite features)

You can use the diagnose npu np6lite npu-feature command to see the NP6Lite features that are enabled on your FortiGate and those that are not.

The following command output, from a FortiGate 200E, shows the default NP6Lite configuration for most FortiGates with NP6Lite processors:

diagnose npu np6lite npu-feature
                    np_0      np_1    
------------------- --------- --------- 
Fastpath            Enabled   Enabled   
IPv4 firewall       Yes       Yes       
IPv6 firewall       Yes       Yes       
IPv4 IPSec          Yes       Yes       
IPv6 IPSec          Yes       Yes       
IPv4 tunnel         Yes       Yes       
IPv6 tunnel         Yes       Yes       
GRE tunnel          No        No           

If you use the following command to disable fastpath:

config system npu

set fastpath disable

end

The npu-feature command output show this configuration change:

diagnose npu np6lite npu-feature
                    np_0      np_1    
------------------- --------- --------- 
Fastpath            Disabled  Disabled   
IPv4 firewall       Yes       Yes       
IPv6 firewall       Yes       Yes       
IPv4 IPSec          Yes       Yes       
IPv6 IPSec          Yes       Yes       
IPv4 tunnel         Yes       Yes       
IPv6 tunnel         Yes       Yes       
GRE tunnel          No        No