Viewing your FortiGate NP7 processor configuration
Use the following command to view the NP7 processor hardware configuration of your FortiGate:
diagnose npu np7 port-list
For example, for the FortiGate 4200F or 4201F the output would be:
diagnose npu np7 port-list Front Panel Port: Name Max_speed(Mbps) Dflt_speed(Mbps) NP_group Switch_id SW_port_id SW_port_name ------ --------------- --------------- --------------- --------- ---------- ------------ port1 25000 10000 NP#0-3 0 37 xe10 port2 25000 10000 NP#0-3 0 38 xe11 port3 25000 10000 NP#0-3 0 39 xe12 port4 25000 10000 NP#0-3 0 40 xe13 port5 25000 10000 NP#0-3 0 41 xe14 port6 25000 10000 NP#0-3 0 42 xe15 port7 25000 10000 NP#0-3 0 43 xe16 port8 25000 10000 NP#0-3 0 44 xe17 port9 25000 10000 NP#0-3 0 45 xe18 port10 25000 10000 NP#0-3 0 46 xe19 port11 25000 10000 NP#0-3 0 47 xe20 port12 25000 10000 NP#0-3 0 48 xe21 port13 25000 10000 NP#0-3 0 49 xe22 port14 25000 10000 NP#0-3 0 50 xe23 port15 25000 10000 NP#0-3 0 51 xe24 port16 25000 10000 NP#0-3 0 52 xe25 port17 100000 100000 NP#0-3 0 57 ce5 port18 100000 100000 NP#0-3 0 53 ce4 port19 100000 100000 NP#0-3 0 67 ce7 port20 100000 100000 NP#0-3 0 61 ce6 port21 100000 100000 NP#0-3 0 75 ce9 port22 100000 100000 NP#0-3 0 71 ce8 port23 100000 100000 NP#0-3 0 83 ce11 port24 100000 100000 NP#0-3 0 79 ce10 ------ --------------- --------------- --------------- --------- ---------- ------------ NP Port: Name Switch_id SW_port_id SW_port_name ------ --------- ---------- ------------ np0_0 0 5 ce0 np0_1 0 9 ce1 np1_0 0 13 ce2 np1_1 0 17 ce3 np2_0 0 115 ce13 np2_1 0 111 ce12 np3_0 0 123 ce15 np3_1 0 119 ce14 ------ --------- ---------- ------------ * Max_speed: Maximum speed, Dflt_speed: Default speed * SW_port_id: Switch port ID, SW_port_name: Switch port name
For more example output for different FortiGate models, see FortiGate NP7 architectures.
You can also use the following command to view the features enabled or disabled on the NP7 processors in your FortiGate unit:
diagnose npu np7 system-config default_qos_type : shaping (1) max_sse_tmo : 40 (seconds) per_sess_accounting : enabled-by-log (0) sess_acct_intvl : 5 (seconds) mcast_sess_accounting : tpe-based (0) ip_assembly : disabled ip_assembly_min_tmo : 64 (us) ip_assembly_max_tmo : 10000 (us)