Change log
Date |
Change description |
---|---|
January 11, 2023 |
Added more information about |
November 22, 2022 |
Corrections to Creating hyperscale firewall VDOMs. |
August 9, 2022 |
Changes to Configuring HA hardware session synchronization. New sections: Revised information about using the FortiGate-4200F/4201F and 4400F/4400F HA1, HA2, AUX1 and AUX2 interfaces. Using the following command is no longer recommended. Instead see the new section Recommended interface use for an FGCP HA hyperscale firewall cluster. config system npu config port-path-option set ports-using-npu {ha1 ha2 aux1 aux2} end |
December 17, 2021 |
Removed information about the |
December 2, 2021 |
Added two new FGCP HA-related limitations to Hyperscale firewall 6.4.6 incompatibilities and limitations. Improved the information in Enabling hyperscale firewall features. |
October 18, 2021 |
Removed the incorrect statement "NP7 fragment reassembly is not supported" from Hyperscale firewall 6.4.6 incompatibilities and limitations. New section: Reassembling fragmented packets. Corrected the section Setting the hyperscale firewall VDOM default policy action. |
July 12, 2021 |
Added diagnose commands to Hash table message queue mode. Corrected information about multicast logging in Configuring hardware logging and Multicast logging example. |
July 9, 2021 |
Initial version. |