Fortinet black logo

Administration Guide

Changing the view settings

Changing the view settings

The view settings change the look and language of the FortiOS GUI.

To change the view settings in the GUI:
  1. Go to System > Settings.
  2. In the View Settings section, configure the following settings:

    Language

    Set the GUI language: English, French, Spanish, Portuguese, Japanese, Traditional Chinese, Simplifies Chinese, Korean.

    Lines per page

    Set the number of lines per page, from 20 to 100.

    Theme

    Set the theme color: Green, Red, Blue, Melongene, or Mariner.

    Date/Time Display

    Set the date and time to display using the FortiGate's or the browser's timezone.

    NGFW Mode

    Set the NGFW mode to either Profile-based (default) or Policy-based.

    If Policy-based is selected, the SSL/SSH Inspection profile must be selected.

  3. Click Apply.
To change the view settings in the CLI:
config system global
    set language {english | french | spanish | portuguese | japanese | trach | simch | korean}
    set gui-lines-per-page <integer>
    set gui-theme {green | red | blue | melongene | mariner}
    set gui-date-time-source {system | browser}
end
config system settings
    set ngfw-mode {profile-based | policy-based}
    set ssl-ssh-profile {certificate-inspection | custom-deep-inspection | deep-inspection | no-inspection}
end

Changing the view settings

The view settings change the look and language of the FortiOS GUI.

To change the view settings in the GUI:
  1. Go to System > Settings.
  2. In the View Settings section, configure the following settings:

    Language

    Set the GUI language: English, French, Spanish, Portuguese, Japanese, Traditional Chinese, Simplifies Chinese, Korean.

    Lines per page

    Set the number of lines per page, from 20 to 100.

    Theme

    Set the theme color: Green, Red, Blue, Melongene, or Mariner.

    Date/Time Display

    Set the date and time to display using the FortiGate's or the browser's timezone.

    NGFW Mode

    Set the NGFW mode to either Profile-based (default) or Policy-based.

    If Policy-based is selected, the SSL/SSH Inspection profile must be selected.

  3. Click Apply.
To change the view settings in the CLI:
config system global
    set language {english | french | spanish | portuguese | japanese | trach | simch | korean}
    set gui-lines-per-page <integer>
    set gui-theme {green | red | blue | melongene | mariner}
    set gui-date-time-source {system | browser}
end
config system settings
    set ngfw-mode {profile-based | policy-based}
    set ssl-ssh-profile {certificate-inspection | custom-deep-inspection | deep-inspection | no-inspection}
end