HA graceful upgrade to FortiOS 6.4.12
Use the following steps to upgrade a FortiGate-6000 or 7000 HA cluster with uninterruptible-upgrade
enabled from FortiOS 6.2.13 build 1272 or 6.4.10 build 1875 to FortiOS 6.4.12 Build 1920.
Enabling uninterruptible-upgrade
allows you to upgrade the firmware of an operating FortiGate-6000 or 7000 HA configuration with only minimal traffic interruption. During the upgrade, the secondary FortiGate upgrades first. Then a failover occurs and the newly upgraded FortiGate becomes the primary FortiGate and the firmware of the new secondary FortiGate upgrades.
To perform a graceful upgrade of your FortiGate-6000 or 7000 from FortiOS 6.2.13 or 6.4.10 to FortiOS 6.4.12:
-
Use the following command to enable uninterruptible-upgrade to support HA graceful upgrade:
config system ha
set uninterruptible-upgrade enable
end
-
Download FortiOS 6.4.12 firmware for FortiGate-6000 or 7000 from the https://support.fortinet.com FortiGate-6K7K 6.4.12 firmware image folder.
-
Perform a normal upgrade of your HA cluster using the downloaded firmware image file.
-
Verify that you have installed the correct firmware version. For example, for a FortiGate-6301F:
get system status Version: FortiGate-6301F v6.4.12,build1920,230310 (GA.M) ...