Fortinet black logo

FortiOS Carrier

Diagnose firewall gtp tunnel list command

Diagnose firewall gtp tunnel list command

The diagnose fiewall gtp tunnel list command displays information about all of the active GTP tunnels, for example:

diagnose firewall gtp tunnel list
list gtp tunnels

-----------prof=S11u-profile_check_on_RAT=NBIOT ref=6 imsi=208930123000001 msisdn=012300000100000 mei=35349006.987300.1 ms_addr=10.45.0.194 s11_s4 1-----------
-----------index=00000062 life=1438(sec) idle=1438(sec) vd=0  ver=2-----------
c_pkt=2 c_bytes=384 u_pkt=0 u_bytes=0
downlink cfteid:
    addr=172.30.111.2 teid=0x00000001 role=control vd=0 intf_type=s11 mme gtp-c
uplink cfteid:
    addr=172.30.111.4 teid=0x000000c1 role=control vd=0 intf_type=s11/s4 sgw gtp-c
1/1 bearers:
    id=5 linked_id=0 type=regular dead=0 apn=internet selection=ms-or-net-provided-apn apn_restriction=all user_addr=10.45.0.194 u_pkt=0 u_bytes=0
    2 fteids:
        addr=172.30.111.6 teid=0x00000182 role=data vd=0 intf_type=s1-u sgw gtp-u
        addr=172.30.111.7 teid=0x00000182 role=data vd=0 intf_type=s5/s8 pgw gtp-u
Notes about the command output

Index=00000062 means 6x16 + 2 = 98 decimal as shown in GTP Log.

downlink cfteid, addr=172.30.111.2 is the source of the GTP-C create_session_request. The field inf_type=s11 indicates MME.

uplink cfteid, addr=172.30.111.4 is the source of the GTP-C create_session_response. The field intf_type=s11/s4 indicates SGW.

For the bearers, GTP-U traffic (information as received from the SGW in the Create_Session_Response) includes the following fields:

  • addr=172.30.111.6 GTP-U from eNodeB to SGW (S1-U).

  • addr=172.30.111.7 GTP-U from PGW to SGW (S5-U).

Diagnose firewall gtp tunnel list command

The diagnose fiewall gtp tunnel list command displays information about all of the active GTP tunnels, for example:

diagnose firewall gtp tunnel list
list gtp tunnels

-----------prof=S11u-profile_check_on_RAT=NBIOT ref=6 imsi=208930123000001 msisdn=012300000100000 mei=35349006.987300.1 ms_addr=10.45.0.194 s11_s4 1-----------
-----------index=00000062 life=1438(sec) idle=1438(sec) vd=0  ver=2-----------
c_pkt=2 c_bytes=384 u_pkt=0 u_bytes=0
downlink cfteid:
    addr=172.30.111.2 teid=0x00000001 role=control vd=0 intf_type=s11 mme gtp-c
uplink cfteid:
    addr=172.30.111.4 teid=0x000000c1 role=control vd=0 intf_type=s11/s4 sgw gtp-c
1/1 bearers:
    id=5 linked_id=0 type=regular dead=0 apn=internet selection=ms-or-net-provided-apn apn_restriction=all user_addr=10.45.0.194 u_pkt=0 u_bytes=0
    2 fteids:
        addr=172.30.111.6 teid=0x00000182 role=data vd=0 intf_type=s1-u sgw gtp-u
        addr=172.30.111.7 teid=0x00000182 role=data vd=0 intf_type=s5/s8 pgw gtp-u
Notes about the command output

Index=00000062 means 6x16 + 2 = 98 decimal as shown in GTP Log.

downlink cfteid, addr=172.30.111.2 is the source of the GTP-C create_session_request. The field inf_type=s11 indicates MME.

uplink cfteid, addr=172.30.111.4 is the source of the GTP-C create_session_response. The field intf_type=s11/s4 indicates SGW.

For the bearers, GTP-U traffic (information as received from the SGW in the Create_Session_Response) includes the following fields:

  • addr=172.30.111.6 GTP-U from eNodeB to SGW (S1-U).

  • addr=172.30.111.7 GTP-U from PGW to SGW (S5-U).