Configuring Performance SLA test
Configure a performance SLA test that will be tied to the SD-WAN interface members for the Zscaler ZENs.
To configure a Performance SLA test:
- Go to Network > Performance SLA, and click Create New . The New Persormance SLA screen displays.
- Enter a name for the Name field like
Zscaler_VPNTEST
in this case. - Select IPv4 from the IP Version field.
- Select the Protocol to be HTTP.
- The Server field is set to the URL
http://gateway.<zscaler-cloud>.net/vpntest
test page, where<zscaler-cloud>
is to be replaced with your Zscaler cloud name. - Select Specify for the Participants fields and add
Zscaler-DC
andZscaler-SF
SD-WAN interface members as participants. - Click OK.
When configuring the Performance SLA test using the GUI, you cannot configure the HTTP GET request. The Server field only accepts a valid FQDN. Use the CLI to configure the HTTP GET request. |
To configure a Performance SLA test using the CLI:
config system virtual-wan-link
config health-check
edit "Zscaler_VPNTEST"
set server "gateway.<zscaler-cloud>.net"
set protocol http
set http-get "/vpntest"
set interval 10000
set failtime 10
set members 2 3
config sla
edit 1
set latency-threshold 250
set jitter-threshold 100
set packetloss-threshold 5
next
end
next
end
end