Display information about autoscale members in the GUI and CLI, such as their serial number, IP address, instance ID, and transit gateway (AWS only).

Add two-factor authentication support to VPN IKEv2 for remote RADIUS and LDAP users.

Populate source and destination user fields in traffic logs using RADIUS accounting information from authenticated RSSO users.

FortiIPAM is a new IP address management service that helps manage IP addresses within a Security Fabric. FortiGates can use FortiIPAM to automatically assign IP addresses based on the configured network size for the FortiGate interface. The interface's DHCP server settings can be automatically configured to offer addresses within the same subnet.

For WiFi clients associated with a bridge SSID on a FortiAP that is connected to an Ethernet interface of a FortiGate, the DHCP Monitor widget can indicate the AP bridge and the SSID name in the Interface column of those clients' IP leases.

In the CLI, dhcp-option43-insertion is added under VAP configuration to support this feature.

config wireless-controller vap
    edit VAP01
        set dhcp-option43-insertion {enable | disable}
    next
end

By default, dhcp-option43-insertion is set to enable.

The minimum version required for FAP-U is 6.0.3. The minimum version required for FAP-W2 is 6.4.1.

In a scenario where transferring the device to another FortiCloud/FortiCare account is needed, users cannot do this directly on the FortiGate GUI if they have credentials to access to both accounts.

Support IPv6 with vNP/DPDK on FortiGate-VM to improve the performance of firewall and flow UTMs, allowing for greater throughput.

Support Signal Strength and Signal Strength/Noise values by WiFi client IPs in the logs.