Fortinet Document Library

Version:

Version:


Table of Contents

Administration Guide

Download PDF
Copy Link

FortiGate Rugged 30D SNMP bridge MIB module support

SNMP bridge MIB module support is available on FortiGates with 802.1p to monitor STP activity.

Object name

OID

dot1dBridge.dot1dBase.dot1dBaseBridgeAddress

1.3.6.1.2.1.17.1.1

dot1dBridge.dot1dBase.dot1dBaseNumPorts

1.3.6.1.2.1.17.1.2

dot1dBridge.dot1dBase.Type

1.3.6.1.2.1.17.1.3

dot1dBridge.dot1dBase.dot1dBasePortEntry.dot1dBasePortIfIndex

1.3.6.1.2.1.17.1.4.1.2

dot1dBridge.dot1dBase.dot1dBasePortEntry.dot1dBasePortCircuit

1.3.6.1.2.1.17.1.4.1.3

dot1dBridge.dot1dBase.dot1dBasePortEntry.dot1dBasePortDelayExceededDiscards

1.3.6.1.2.1.17.1.4.1.5

dot1dBridge.dot1dBase.dot1dBasePortEntry.dot1dBasePortMtuExceededDiscards

1.3.6.1.2.1.17.1.4.1.5

dot1dBridge.dot1dStp.dot1dStpProtocolSpecification

1.3.6.1.2.1.17.2.1

dot1dBridge.dot1dStp.dot1dStpPriority

1.3.6.1.2.1.17.2.2

dot1dBridge.dot1dStp.dot1dStpDesignatedRoot

1.3.6.1.2.1.17.2.5

dot1dBridge.dot1dStp.dot1dStpRootCost

1.3.6.1.2.1.17.2.6

dot1dBridge.dot1dStp.dot1dStpRootPort

1.3.6.1.2.1.17.2.7

dot1dBridge.dot1dStp.dot1dStpMaxAge

1.3.6.1.2.1.17.2.8

dot1dBridge.dot1dStp.dot1dStpHelloTime

1.3.6.1.2.1.17.2.9

dot1dBridge.dot1dStp.dot1dStpForwardDelay

1.3.6.1.2.1.17.2.11

dot1dBridge.dot1dStp.dot1dStpBridgeMaxAge

1.3.6.1.2.1.17.2.12

dot1dBridge.dot1dStp.dot1dStpBridgeHelloTime

1.3.6.1.2.1.17.2.13

dot1dBridge.dot1dStp.dot1dStpBridgeForwardDelay

1.3.6.1.2.1.17.2.14

dot1dBridge.dot1dStp.dot1dStpPortEntry.dot1dStpPortPriority

1.3.6.1.2.1.17.2.15.1.2

dot1dBridge.dot1dStp.dot1dStpPortEntry.dot1dStpPortState

1.3.6.1.2.1.17.2.15.1.3

dot1dBridge.dot1dStp.dot1dStpPortEntry.dot1dStpPortEnable

1.3.6.1.2.1.17.2.15.1.4

dot1dBridge.dot1dStp.dot1dStpPortEntry.dot1dStpPortPathCost

1.3.6.1.2.1.17.2.15.1.5

To configure an SNMP bridge MIB module:
  1. On the FortiGate, configure SNMP:
    config system snmp sysinfo
        set status enable
        set description "BRIDGE_MIB"
        set contact-info "Strike Freedom"
        set location "QA LAB"
    end
    config system snmp community
        edit 1
            set name "REGR-SWITCH"
            config hosts
                edit 1
                    set ip 172.16.200.55 255.255.255.255
                next
                edit 2
                    set ip 172.18.60.149 255.255.255.255
                next
            end
            set events cpu-high mem-low log-full intf-ip vpn-tun-up vpn-tun-down ha-switch ha-hb-failure ips-anomaly av-oversize av-fragmented fm-conf-change ha-member-up ha-member-down av-conserve av-bypass av-oversize-blocked ips-pkg-update ips-fail-open faz-disconnect
        next
    end
  2. On the SNMP server, run snmpwalk on the OID from the newly added bridge MIB.

    The OID is for the bridge hello time. The SNMP server is able to query the bridge hello time from the FortiGate:

    root@ControlPC:~# snmpwalk -v1 -c REGR-SWITCH 172.16.200.2 1.3.6.1.2.1.17.2.13
    BRIDGE-MIB::dot1dStpBridgeHelloTime.0 = INTEGER: 200 centi-seconds

FortiGate Rugged 30D SNMP bridge MIB module support

SNMP bridge MIB module support is available on FortiGates with 802.1p to monitor STP activity.

Object name

OID

dot1dBridge.dot1dBase.dot1dBaseBridgeAddress

1.3.6.1.2.1.17.1.1

dot1dBridge.dot1dBase.dot1dBaseNumPorts

1.3.6.1.2.1.17.1.2

dot1dBridge.dot1dBase.Type

1.3.6.1.2.1.17.1.3

dot1dBridge.dot1dBase.dot1dBasePortEntry.dot1dBasePortIfIndex

1.3.6.1.2.1.17.1.4.1.2

dot1dBridge.dot1dBase.dot1dBasePortEntry.dot1dBasePortCircuit

1.3.6.1.2.1.17.1.4.1.3

dot1dBridge.dot1dBase.dot1dBasePortEntry.dot1dBasePortDelayExceededDiscards

1.3.6.1.2.1.17.1.4.1.5

dot1dBridge.dot1dBase.dot1dBasePortEntry.dot1dBasePortMtuExceededDiscards

1.3.6.1.2.1.17.1.4.1.5

dot1dBridge.dot1dStp.dot1dStpProtocolSpecification

1.3.6.1.2.1.17.2.1

dot1dBridge.dot1dStp.dot1dStpPriority

1.3.6.1.2.1.17.2.2

dot1dBridge.dot1dStp.dot1dStpDesignatedRoot

1.3.6.1.2.1.17.2.5

dot1dBridge.dot1dStp.dot1dStpRootCost

1.3.6.1.2.1.17.2.6

dot1dBridge.dot1dStp.dot1dStpRootPort

1.3.6.1.2.1.17.2.7

dot1dBridge.dot1dStp.dot1dStpMaxAge

1.3.6.1.2.1.17.2.8

dot1dBridge.dot1dStp.dot1dStpHelloTime

1.3.6.1.2.1.17.2.9

dot1dBridge.dot1dStp.dot1dStpForwardDelay

1.3.6.1.2.1.17.2.11

dot1dBridge.dot1dStp.dot1dStpBridgeMaxAge

1.3.6.1.2.1.17.2.12

dot1dBridge.dot1dStp.dot1dStpBridgeHelloTime

1.3.6.1.2.1.17.2.13

dot1dBridge.dot1dStp.dot1dStpBridgeForwardDelay

1.3.6.1.2.1.17.2.14

dot1dBridge.dot1dStp.dot1dStpPortEntry.dot1dStpPortPriority

1.3.6.1.2.1.17.2.15.1.2

dot1dBridge.dot1dStp.dot1dStpPortEntry.dot1dStpPortState

1.3.6.1.2.1.17.2.15.1.3

dot1dBridge.dot1dStp.dot1dStpPortEntry.dot1dStpPortEnable

1.3.6.1.2.1.17.2.15.1.4

dot1dBridge.dot1dStp.dot1dStpPortEntry.dot1dStpPortPathCost

1.3.6.1.2.1.17.2.15.1.5

To configure an SNMP bridge MIB module:
  1. On the FortiGate, configure SNMP:
    config system snmp sysinfo
        set status enable
        set description "BRIDGE_MIB"
        set contact-info "Strike Freedom"
        set location "QA LAB"
    end
    config system snmp community
        edit 1
            set name "REGR-SWITCH"
            config hosts
                edit 1
                    set ip 172.16.200.55 255.255.255.255
                next
                edit 2
                    set ip 172.18.60.149 255.255.255.255
                next
            end
            set events cpu-high mem-low log-full intf-ip vpn-tun-up vpn-tun-down ha-switch ha-hb-failure ips-anomaly av-oversize av-fragmented fm-conf-change ha-member-up ha-member-down av-conserve av-bypass av-oversize-blocked ips-pkg-update ips-fail-open faz-disconnect
        next
    end
  2. On the SNMP server, run snmpwalk on the OID from the newly added bridge MIB.

    The OID is for the bridge hello time. The SNMP server is able to query the bridge hello time from the FortiGate:

    root@ControlPC:~# snmpwalk -v1 -c REGR-SWITCH 172.16.200.2 1.3.6.1.2.1.17.2.13
    BRIDGE-MIB::dot1dStpBridgeHelloTime.0 = INTEGER: 200 centi-seconds