Fortinet Document Library

Version:

Version:


Table of Contents

Administration Guide

Download PDF
Copy Link

Dynamic connector addresses in SD-WAN policies

Dynamic Fabric Connector addresses can be used in SD-WAN policies.

To add a dynamic connector address to an SD-WAN rule:
  1. Go to Network > SD-WAN Rules.
  2. Click Create New.
  3. In the Name field, enter the rule name.
  4. In the Destination > Address field, click the +. The Select Entries pane will appear.
  5. In the Select Entries pane, select the dynamic connector.

  6. Configure the remaining settings as required.
  7. Click OK to save the rule.

Dynamic connector addresses in SD-WAN policies

Dynamic Fabric Connector addresses can be used in SD-WAN policies.

To add a dynamic connector address to an SD-WAN rule:
  1. Go to Network > SD-WAN Rules.
  2. Click Create New.
  3. In the Name field, enter the rule name.
  4. In the Destination > Address field, click the +. The Select Entries pane will appear.
  5. In the Select Entries pane, select the dynamic connector.

  6. Configure the remaining settings as required.
  7. Click OK to save the rule.