FS-TRANS-FX module on FGR-60F and FGR-60F-3G4G 6.4.9
FS-TRAN-FX 100 Mbps SFP optical transceivers are supported on FGR-60F and FGR-60F-3G4G devices.
The interface speed must be set to 100full
or 100half
.
config system interface edit <name> set speed {100full | 100half} next end
In this example, wan1 is an SFP1 interface, and wan2 is an SFP2 interface.
To verify that the transceiver ports are working:
# get system interface transceiver Interface wan1 - SFP/SFP+ (0.2G) Vendor Name : Optech Part No. : OP6A-M02-13-IM Serial No. : L205050000 SFP-DSL MAC : Interface wan2 - SFP/SFP+ (0.2G) Vendor Name : Optech Part No. : OP6A-M02-13-IM Serial No. : L205050000 SFP-DSL MAC : Optical Optical Optical SFP/SFP+ Temperature Voltage Tx Bias Tx Power Rx Power Interface (Celsius) (Volts) (mA) (dBm) (dBm) ------------ ------------ ------------ ------------ ------------ ------------ wan1 36.2 3.29 11.56 -15.7 -16.0 wan2 36.6 3.30 12.41 -16.0 -17.5 ++ : high alarm, + : high warning, - : low warning, -- : low alarm, ? : suspect.