Fortinet black logo

Hyperscale Firewall Guide

Adding hardware logging to a hyperscale firewall policy

Adding hardware logging to a hyperscale firewall policy

Use the following command to enable hardware logging in a hyperscale firewall policy and assign a hardware logging server group to the firewall policy.

config firewall {hyperscale-policy | hyperscale-policy46 | hyperscale-policy6 | hyperscale-policy64}

edit <id>

set policy-offload {enable | disable}

set cgn-log-server-grp <group-name>

end

From the GUI:

  1. Go to Policy & Objects and select IPv4 Hyperscale Policy, IPv6 Hyperscale policy, NAT46 Hyperscale Policy, or NAT46 Hyperscale Policy.
  2. While configuring the policy, select Log Hyperscale SPU Offload Traffic.
  3. Select a Log Server Group.

Adding hardware logging to a hyperscale firewall policy

Use the following command to enable hardware logging in a hyperscale firewall policy and assign a hardware logging server group to the firewall policy.

config firewall {hyperscale-policy | hyperscale-policy46 | hyperscale-policy6 | hyperscale-policy64}

edit <id>

set policy-offload {enable | disable}

set cgn-log-server-grp <group-name>

end

From the GUI:

  1. Go to Policy & Objects and select IPv4 Hyperscale Policy, IPv6 Hyperscale policy, NAT46 Hyperscale Policy, or NAT46 Hyperscale Policy.
  2. While configuring the policy, select Log Hyperscale SPU Offload Traffic.
  3. Select a Log Server Group.