Fortinet Document Library

Version:

Version:

Version:

Version:


Table of Contents

Hardware Acceleration

Download PDF
Copy Link

diagnose npu np6

The diagnose npu np6 command displays extensive information about NP6 processors and the sessions that they are processing. Some of the information displayed can be useful for understanding the NP6 configuration, seeing how sessions are being processed and diagnosing problems. Some of the commands may only be useful for Fortinet software developers. The command syntax is:

diagnose npu np6 {options}

The following options are available:

fastpath {disable | enable} <np6-od> enable or disable fastpath processing for a selected NP6.

dce shows NP6 non-zero sub-engine drop counters for the selected NP6.

dce-all show all subengine drop counters.

anomaly-drop show non-zero L3/L4 anomaly check drop counters.

anomaly-drop-all show all L3/L4 anomaly check drop counters.

hrx-drop show non-zero host interface drop counters.

hrx-drop-all show all host interface drop counters.

session-stats show session offloading statistics counters.

session-stats-clear clear session offloading statistics counters.

sse-stats show hardware session statistics counters.

sse-stats-clear show hardware session statistics counters.

pdq show packet buffer queue counters.

xgmac-stats show XGMAC MIBs counters.

xgmac-stats-clear clear XGMAC MIBS counters.

port-list show port list.

ipsec-stats show IPsec offloading statistics.

ipsec-stats-clear clear IPsec offloading statistics.

eeprom-read read NP6 EEPROM.

npu-feature show NPU feature and status.

register show NP6 registers.

fortilink configure managed FortiSwitch.

synproxy-stats show synproxy statistics.

diagnose npu np6

The diagnose npu np6 command displays extensive information about NP6 processors and the sessions that they are processing. Some of the information displayed can be useful for understanding the NP6 configuration, seeing how sessions are being processed and diagnosing problems. Some of the commands may only be useful for Fortinet software developers. The command syntax is:

diagnose npu np6 {options}

The following options are available:

fastpath {disable | enable} <np6-od> enable or disable fastpath processing for a selected NP6.

dce shows NP6 non-zero sub-engine drop counters for the selected NP6.

dce-all show all subengine drop counters.

anomaly-drop show non-zero L3/L4 anomaly check drop counters.

anomaly-drop-all show all L3/L4 anomaly check drop counters.

hrx-drop show non-zero host interface drop counters.

hrx-drop-all show all host interface drop counters.

session-stats show session offloading statistics counters.

session-stats-clear clear session offloading statistics counters.

sse-stats show hardware session statistics counters.

sse-stats-clear show hardware session statistics counters.

pdq show packet buffer queue counters.

xgmac-stats show XGMAC MIBs counters.

xgmac-stats-clear clear XGMAC MIBS counters.

port-list show port list.

ipsec-stats show IPsec offloading statistics.

ipsec-stats-clear clear IPsec offloading statistics.

eeprom-read read NP6 EEPROM.

npu-feature show NPU feature and status.

register show NP6 registers.

fortilink configure managed FortiSwitch.

synproxy-stats show synproxy statistics.