FortiGate 900D fast path architecture

The FortiGate 900D includes two NP6 processors that are not connected by an integrated switch fabric (ISF). Without an ISF, traffic through a FortiGate 900D could experience lower latency than traffic through similar hardware with an ISF. The NP6 processors are connected to network interfaces as follows:

Because the FortiGate 900D does not have an ISF you cannot create Link Aggregation Groups (LAGs) that include interfaces connected to both NP6 processors.

• Eight 1Gb SFP interfaces (port17-port24), eight 1Gb RJ-45 Ethernet interfaces (port25-32) and one 10Gb SFP+ interface (portB) share connections to the first NP6 processor.
• Eight 1Gb SFP interfaces (port1-port8), eight RJ-45 Ethernet interfaces (port9-16) and one 10Gb SFP+ interface (portA) share connections to the second NP6 processor.

You can use the following get command to display the FortiGate 900D NP6 configuration. The command output shows two NP6s named NP6_0 and NP6_1. The output also shows the interfaces (ports) connected to each NP6. You can also use the diagnose npu np6 port-list command to display this information.

get hardware npu np6 port-list

Chip XAUI Ports Max Cross-chip

Speed offloading

------ ---- ------- ----- ----------

np6_0 0

1 port17 1G Yes

1 port18 1G Yes

1 port19 1G Yes

1 port20 1G Yes

1 port21 1G Yes

1 port22 1G Yes

1 port23 1G Yes

1 port24 1G Yes

1 port27 1G Yes

1 port28 1G Yes

1 port25 1G Yes

1 port26 1G Yes

1 port31 1G Yes

1 port32 1G Yes

1 port29 1G Yes

1 port30 1G Yes

2 portB 10G Yes

3

------ ---- ------- ----- ----------

np6_1 0

1 port1 1G Yes

1 port2 1G Yes

1 port3 1G Yes

1 port4 1G Yes

1 port5 1G Yes

1 port6 1G Yes

1 port7 1G Yes

1 port8 1G Yes

1 port11 1G Yes

1 port12 1G Yes

1 port9 1G Yes

1 port10 1G Yes

1 port15 1G Yes

1 port16 1G Yes

1 port13 1G Yes

1 port14 1G Yes

2 portA 10G Yes

3