Fortinet black logo

FortiOS Carrier

Setting up Gi or SGi gatekeeper settings

Setting up Gi or SGi gatekeeper settings

Use the following command to configure anti-overbilling Gi or SGi gatekeeper settings:

config global

config system gi-gk

set context <context-id>

set port <port-number>

end

context the context ID of the network. This ID must match the ID entered on the Gi or SGi firewall. The default is 696.

port the port number used by the Gi or SGi firewall for anti-overbilling communication. The range is 0 to 65535. The default port is 21123.

From the GUI, go to System > Settings > Gi Gatekeeper Settings and configure the Context ID and Port.

Setting up Gi or SGi gatekeeper settings

Use the following command to configure anti-overbilling Gi or SGi gatekeeper settings:

config global

config system gi-gk

set context <context-id>

set port <port-number>

end

context the context ID of the network. This ID must match the ID entered on the Gi or SGi firewall. The default is 696.

port the port number used by the Gi or SGi firewall for anti-overbilling communication. The range is 0 to 65535. The default port is 21123.

From the GUI, go to System > Settings > Gi Gatekeeper Settings and configure the Context ID and Port.