GUI support for FortiAP U431F and U433F 6.2.3
The Platform mode field on the FortiAP Profiles page allows users to select either Dual 5G or Single 5G for tri-radio models (U431F and U433F). The dual and single modes provide greater flexibility for 5 GHz, 2.4 GHz, and dedicated monitoring. There is a 160 MHz bandwidth option in the Channel width field to support 802.11ax. For 5 GHz radios, 160 MHz channel bonding is supported for 802.11ac and 802.11ax.
Platform mode |
Radio allocation |
---|---|
Dual 5G |
|
Single 5G |
|
To configure the platform mode:
- Go to WiFi & Switch Controller > FortiAP Profiles and click Create New.
- In the Platform field, select a tri-radio model.
- For Platform mode, click either Dual 5G or Single 5G.
- Configure the remaining settings for each radio as needed.
Configuration for Dual 5G (radio 1 supports the lower 5 GHz channels and radio 2 supports the higher 5 GHz channels):
Configuration for Single 5G (radio 3 is already set to Dedicated Monitor mode):
- Click OK.