Fortinet black logo

New Features

Authentication Policy Extensions

Copy Link
Copy Doc ID 761d83e3-4a7b-11e9-94bf-00505692583a:238665
Download PDF

Authentication Policy Extensions

In 6.0, if you defined an authentication policy for specific traffic, then you might need to exclude the destination from the default implicit policy, otherwise, the implicit rule might allow unauthenticated users go to through. This new option forces the authentication to take precedence over subsequent rules without having to create additional policies.

By default, unauthenticated traffic is permitted to fall through to the next policy. FortiGate only forces unauthenticated users to authenticate against the authentication policy when there are no other matching policies. In this version, administrators can force the authentication to always take place.

To set authentication requirement:
config user setting
    set auth-on-demand <always|implicitly>
end

always

Always trigger firewall authentication on demand.

implicitly (default)

Implicitly trigger firewall authentication on demand. This is the default setting and the original behavior.

You can only use CLI to configure this feature. See the following example.

config user setting
    set auth-on-demand always
end
config firewall policy
    edit 1
        set name "QA to Database"
        set srcintf "port10"
        set dstintf "port9"
        set srcaddr "QA_subnet"
        set dstaddr "Database"
        set action accept
        set schedule "always"
        set service "ALL"
        set fsso disable
        set groups "qa_group"
        set nat enable
    next
    edit 2
        set name "QA to Internet"
        set srcintf "port10"
        set dstintf "port9"
        set srcaddr "QA_subnet"
        set dstaddr "all"
        set action accept
        set schedule "always"
        set service "ALL"
        set fsso disable
        set nat enable
    next
end

Related Videos

sidebar video

Implicit Policy Fall-Through Authentication

  • 1,121 views
  • 5 years ago

Authentication Policy Extensions

In 6.0, if you defined an authentication policy for specific traffic, then you might need to exclude the destination from the default implicit policy, otherwise, the implicit rule might allow unauthenticated users go to through. This new option forces the authentication to take precedence over subsequent rules without having to create additional policies.

By default, unauthenticated traffic is permitted to fall through to the next policy. FortiGate only forces unauthenticated users to authenticate against the authentication policy when there are no other matching policies. In this version, administrators can force the authentication to always take place.

To set authentication requirement:
config user setting
    set auth-on-demand <always|implicitly>
end

always

Always trigger firewall authentication on demand.

implicitly (default)

Implicitly trigger firewall authentication on demand. This is the default setting and the original behavior.

You can only use CLI to configure this feature. See the following example.

config user setting
    set auth-on-demand always
end
config firewall policy
    edit 1
        set name "QA to Database"
        set srcintf "port10"
        set dstintf "port9"
        set srcaddr "QA_subnet"
        set dstaddr "Database"
        set action accept
        set schedule "always"
        set service "ALL"
        set fsso disable
        set groups "qa_group"
        set nat enable
    next
    edit 2
        set name "QA to Internet"
        set srcintf "port10"
        set dstintf "port9"
        set srcaddr "QA_subnet"
        set dstaddr "all"
        set action accept
        set schedule "always"
        set service "ALL"
        set fsso disable
        set nat enable
    next
end