Fortinet Document Library

Version:


Table of Contents

More Links

LACP support on entry-level E-series devices  6.2.1
LACP support on entry-level devices  6.2.2

New Features

6.2.0
Download PDF
Copy Link

LACP support on entry-level devices  6.2.4

Link Aggregation Control Protocol (LACP) is now supported on FortiGate and FortiWiFi 61F and 60F devices in FortiOS 6.2.4.

To create a link aggregation interface in the GUI:
  1. Go to Network > Interfaces.
  2. Click Create New > Interface.
  3. Set Type to 802.3ad Aggregate.
  4. Configure the other settings as required.
  5. Click OK.
To create a link aggregation interface in the CLI:
configure system interface 
    edit "aggregateinterf"
        set vdom "root"
        set type aggregate
        set member "internal1" "internal2"
        set device-identification enable
        set lldp-transmission enable
        set role lan
        set snmp-index 13
    next
end
To check the aggregate interface status:
diagnose netlink aggregate name <name of aggregate interface> 

More Links

LACP support on entry-level devices  6.2.4

Link Aggregation Control Protocol (LACP) is now supported on FortiGate and FortiWiFi 61F and 60F devices in FortiOS 6.2.4.

To create a link aggregation interface in the GUI:
  1. Go to Network > Interfaces.
  2. Click Create New > Interface.
  3. Set Type to 802.3ad Aggregate.
  4. Configure the other settings as required.
  5. Click OK.
To create a link aggregation interface in the CLI:
configure system interface 
    edit "aggregateinterf"
        set vdom "root"
        set type aggregate
        set member "internal1" "internal2"
        set device-identification enable
        set lldp-transmission enable
        set role lan
        set snmp-index 13
    next
end
To check the aggregate interface status:
diagnose netlink aggregate name <name of aggregate interface>