Failover monitoring
If the primary unit in the cluster fails, the units in the cluster renegotiate to select a new primary unit. Failure of the primary unit results in the following:
- If SNMP is enabled, the new primary unit sends HA trap messages. The messages indicate a cluster status change, HA heartbeat failure, and HA member down.
- If event logging is enabled and HA activity event is selected, the new primary unit records log messages that show that the unit has become the primary unit.
- If alert email is configured to send email for HA activity events, the new primary unit sends an alert email containing the log message recorded by the event log.
- The cluster contains fewer FortiGates. The failed primary unit no longer appears on the Cluster Members list.
- The host name and serial number of the primary unit changes. You can see these changes when you log into the GUI or CLI.
- The cluster info displayed on the dashboard, cluster members list or from the
get system ha status
command changes.
If a subordinate unit fails, the cluster continues to function normally. Failure of a subordinate unit results in the following:
- If event logging is enabled and HA activity event is selected, the primary unit records log messages that show that a subordinate has been removed from the cluster.
- If alert email is configured to send email for HA activity events, the new primary unit sends an alert email containing the log message recorded by the event log.
- The cluster contains fewer FortiGates. The failed unit no longer appears on the Cluster Members list.