Fortinet Document Library

Version:


Table of Contents

CLI Reference

6.0.6
Download PDF
Copy Link

system lte-modem

Use this command to configure an LTE/WIMAX modem. This command is available only in NAT mode. For more information on custom configuring modems, see Modems.

If you are custom configuring a 3G modem, instead use the system 3g-modem custom command.

config system lte-modem
    set status {enable | disable}   Enable/disable USB LTE/WIMAX device.
    set extra-init {string}   Extra initialization string for USB LTE/WIMAX devices. size[127]
    set authtype {none | pap | chap}   Authentication type for PDP-IP packet data calls.
            none  Username and password not required.
            pap   Use PAP authentication.
            chap  Use CHAP authentication.
    set username {string}   Authentication username for PDP-IP packet data calls. size[63]
    set passwd {password_string}   Authentication password for PDP-IP packet data calls. size[128]
    set apn {string}   Login APN string for PDP-IP packet data calls. size[127]
    set modem-port {integer}   Modem port index (0 - 20). range[0-20]
    set mode {standalone | redundant}   Modem operation mode.
            standalone  Standalone modem operation mode.
            redundant   Redundant modem operation mode where the modem is used as a backup interface.
    set holddown-timer {integer}   Hold down timer (10 - 60 sec). range[10-60]
    set interface {string}   The interface that the modem is acting as a redundant interface for. size[63] - datasource(s): system.interface.name
end

system lte-modem

Use this command to configure an LTE/WIMAX modem. This command is available only in NAT mode. For more information on custom configuring modems, see Modems.

If you are custom configuring a 3G modem, instead use the system 3g-modem custom command.

config system lte-modem
    set status {enable | disable}   Enable/disable USB LTE/WIMAX device.
    set extra-init {string}   Extra initialization string for USB LTE/WIMAX devices. size[127]
    set authtype {none | pap | chap}   Authentication type for PDP-IP packet data calls.
            none  Username and password not required.
            pap   Use PAP authentication.
            chap  Use CHAP authentication.
    set username {string}   Authentication username for PDP-IP packet data calls. size[63]
    set passwd {password_string}   Authentication password for PDP-IP packet data calls. size[128]
    set apn {string}   Login APN string for PDP-IP packet data calls. size[127]
    set modem-port {integer}   Modem port index (0 - 20). range[0-20]
    set mode {standalone | redundant}   Modem operation mode.
            standalone  Standalone modem operation mode.
            redundant   Redundant modem operation mode where the modem is used as a backup interface.
    set holddown-timer {integer}   Hold down timer (10 - 60 sec). range[10-60]
    set interface {string}   The interface that the modem is acting as a redundant interface for. size[63] - datasource(s): system.interface.name
end