system netflow
Use this command to configure NetFlow network traffic monitoring on the FortiGate.
|
You must configure collector-ip, collector-port, and source-ip commands in order to use NetFlow. |
config system netflow
set collector-ip {ipv4 address} Collector IP.
set collector-port {integer} NetFlow collector port number. range[0-65535]
set source-ip {ipv4 address} Source IP address for communication with the NetFlow agent.
set active-flow-timeout {integer} Timeout to report active flows (1 - 60 min, default = 30). range[1-60]
set inactive-flow-timeout {integer} Timeout for periodic report of finished flows (10 - 600 sec, default = 15). range[10-600]
set template-tx-timeout {integer} Timeout for periodic template flowset transmission (1 - 1440 min, default = 30). range[1-1440]
set template-tx-counter {integer} Counter of flowset records before resending a template flowset record. range[10-6000]
end