Fortinet Document Library

Version:


Table of Contents

CLI Reference

6.0.6
Download PDF
Copy Link

system session list

Command returns a list of all the sessions active on the FortiGate unit. or the current virtual domain if virtual domain mode is enabled.

Syntax

get system session list

Example output

PROTO     EXPIRE  SOURCE         SOURCE-NAT   DESTINATION    DESTINATION-NAT

tcp 0 127.0.0.1:1083 -          127.0.0.1:514 -

tcp 0 127.0.0.1:1085 -          127.0.0.1:514 -

tcp 10 127.0.0.1:1087 -          127.0.0.1:514 -

tcp 20 127.0.0.1:1089 -          127.0.0.1:514 -

tcp 30 127.0.0.1:1091 -          127.0.0.1:514 -

tcp 40 127.0.0.1:1093 -          127.0.0.1:514 -

tcp 60 127.0.0.1:1097 -          127.0.0.1:514 -

tcp 70 127.0.0.1:1099 -          127.0.0.1:514 -

tcp 80 127.0.0.1:1101 -          127.0.0.1:514 -

tcp 90 127.0.0.1:1103 -          127.0.0.1:514 -

tcp 100 127.0.0.1:1105 -          127.0.0.1:514 -

tcp 110 127.0.0.1:1107 -          127.0.0.1:514 -

tcp 103 172.20.120.16:3548 -        172.20.120.133:22 -

tcp 3600 172.20.120.16:3550 -        172.20.120.133:22 -

udp 175 127.0.0.1:1026 -          127.0.0.1:53 -

tcp 5 127.0.0.1:1084 -          127.0.0.1:514 -

tcp 5 127.0.0.1:1086 -          127.0.0.1:514 -

tcp 15 127.0.0.1:1088 -          127.0.0.1:514 -

tcp 25 127.0.0.1:1090 -          127.0.0.1:514 -

tcp 45 127.0.0.1:1094 -          127.0.0.1:514 -

tcp 59 127.0.0.1:1098 -          127.0.0.1:514 -

tcp 69 127.0.0.1:1100 -          127.0.0.1:514 -

tcp 79 127.0.0.1:1102 -          127.0.0.1:514 -

tcp 99 127.0.0.1:1106 -          127.0.0.1:514 -

tcp 109 127.0.0.1:1108 -          127.0.0.1:514 -

tcp 119 127.0.0.1:1110 -          127.0.0.1:514 -

Variable Description

PROTO

The transfer protocol of the session.

EXPIRE

How long before this session will terminate.

SOURCE

The source IP address and port number.

SOURCE-NAT

The source of the NAT. ‘-’ indicates there is no NAT.

DESTINATION

The destination IP address and port number.

DESTINATION-NAT

The destination of the NAT. ‘-’ indicates there is no NAT.

system session list

Command returns a list of all the sessions active on the FortiGate unit. or the current virtual domain if virtual domain mode is enabled.

Syntax

get system session list

Example output

PROTO     EXPIRE  SOURCE         SOURCE-NAT   DESTINATION    DESTINATION-NAT

tcp 0 127.0.0.1:1083 -          127.0.0.1:514 -

tcp 0 127.0.0.1:1085 -          127.0.0.1:514 -

tcp 10 127.0.0.1:1087 -          127.0.0.1:514 -

tcp 20 127.0.0.1:1089 -          127.0.0.1:514 -

tcp 30 127.0.0.1:1091 -          127.0.0.1:514 -

tcp 40 127.0.0.1:1093 -          127.0.0.1:514 -

tcp 60 127.0.0.1:1097 -          127.0.0.1:514 -

tcp 70 127.0.0.1:1099 -          127.0.0.1:514 -

tcp 80 127.0.0.1:1101 -          127.0.0.1:514 -

tcp 90 127.0.0.1:1103 -          127.0.0.1:514 -

tcp 100 127.0.0.1:1105 -          127.0.0.1:514 -

tcp 110 127.0.0.1:1107 -          127.0.0.1:514 -

tcp 103 172.20.120.16:3548 -        172.20.120.133:22 -

tcp 3600 172.20.120.16:3550 -        172.20.120.133:22 -

udp 175 127.0.0.1:1026 -          127.0.0.1:53 -

tcp 5 127.0.0.1:1084 -          127.0.0.1:514 -

tcp 5 127.0.0.1:1086 -          127.0.0.1:514 -

tcp 15 127.0.0.1:1088 -          127.0.0.1:514 -

tcp 25 127.0.0.1:1090 -          127.0.0.1:514 -

tcp 45 127.0.0.1:1094 -          127.0.0.1:514 -

tcp 59 127.0.0.1:1098 -          127.0.0.1:514 -

tcp 69 127.0.0.1:1100 -          127.0.0.1:514 -

tcp 79 127.0.0.1:1102 -          127.0.0.1:514 -

tcp 99 127.0.0.1:1106 -          127.0.0.1:514 -

tcp 109 127.0.0.1:1108 -          127.0.0.1:514 -

tcp 119 127.0.0.1:1110 -          127.0.0.1:514 -

Variable Description

PROTO

The transfer protocol of the session.

EXPIRE

How long before this session will terminate.

SOURCE

The source IP address and port number.

SOURCE-NAT

The source of the NAT. ‘-’ indicates there is no NAT.

DESTINATION

The destination IP address and port number.

DESTINATION-NAT

The destination of the NAT. ‘-’ indicates there is no NAT.