Incoming IP
Restricting the IP address of the explicit IPv4 web proxy
You can use the following command to restrict access to the explicit web proxy using only one IP address. The IP address that you specify must be the IP address of an interface that the explicit web proxy is enabled on. You might want to use this option if the explicit FTP proxy is enabled on an interface with multiple IP addresses.
For example, to require uses to connect to the IP address 10.31.101.100 to connect to the explicit web proxy:
config web-proxy explicit
set incoming-ip 10.31.101.100
end
Restricting the IP address of the explicit IPv6 web proxy
You can use the following command to restrict access to the IPv6 explicit web proxy to use only one IP6 IP address. The IPv6 address that you specify must be the IPv6 address of an interface that the explicit web proxy is enabled on. You might want to use this option if the explicit web proxy is enabled on an interface with multiple IPv6 addresses.
For example, to require uses to connect to the IPv6 address 2001:db8:0:2::30 to connect to the explicit IPv6 web proxy:
config web-proxy explicit
set incoming-ipv6 2001:db8:0:2::30
end