switch-controller qos ip-dscp-map
Use this command to configure a DSCP map. A DSCP map defines a mapping between IP precedence or DSCP values and the egress queue values. For IP precedence, you have the following choices:
- network-control—Network control
- internetwork-control—Internetwork control
- critic-ecp—Critic and emergency call processing (ECP)
- flashoverride—Flash override
- flash—Flash
- immediate—Immediate
- priority—Priority
- routine—Routine
config switch-controller qos ip-dscp-map edit {name} # Configure FortiSwitch QoS IP precedence/DSCP. set name {string} Dscp map name. size[63] set description {string} Description of the ip-dscp map name. size[63] config map edit {name} # Maps between IP-DSCP value to COS queue. set name {string} Dscp mapping entry name. size[63] set cos-queue {integer} COS queue number. range[0-7] set diffserv {option} Differentiated service. CS0 DSCP CS0. CS1 DSCP CS1. AF11 DSCP AF11. AF12 DSCP AF12. AF13 DSCP AF13. CS2 DSCP CS2. AF21 DSCP AF21. AF22 DSCP AF22. AF23 DSCP AF23. CS3 DSCP CS3. AF31 DSCP AF31. AF32 DSCP AF32. AF33 DSCP AF33. CS4 DSCP CS4. AF41 DSCP AF41. AF42 DSCP AF42. AF43 DSCP AF43. CS5 DSCP CS5. EF DSCP EF. CS6 DSCP CS6. CS7 DSCP CS7. set ip-precedence {option} IP Precedence. network-control Network control. internetwork-control Internetwork control. critic-ecp Critic ECP. flashoverride Flash override. flash Flash. immediate Immediate. priority Priority. routine Routine. set value {string} Raw values of DSCP (0 - 63). next next end