sfp-mode-sgmii
Change the SFP mode for an NP2 card to SGMII. By default when an AMC card is inserted the SFP mode is set to SERDES mode by default.
If a configured NP2 card is removed and re-inserted, the SFP mode goes back to the default.
In these situations, the sfpmode-sgmii
command will change the SFP mode from SERDES to SGMII for the interface specified.
Syntax
execute sfpmode-sgmii <interface>
<interface> is the NP2 interface where you are changing the SFP mode.