disk raid
Use this command to view information about and change the raid settings on FortiGate units that support RAID.
Syntax
Disable RAID for the FortiGate
execute disk raid disable disable RAID
Enable RAID
execute disk raid enable enable RAID {RAID level} supported: Raid-0, Raid-1 (default: Raid-0)
Rebuild a RAID
Rebuild RAID on the FortiGate unit at the same RAID level. You can only execute this command if a RAID error has been detected. Changing the RAID level takes a while and deletes all data on the disk array.
execute disk raid rebuild rebuild RAID
Rebuild a RAID with a different RAID level
execute disk raid rebuild-level rebuild RAID with new level {RAID level} supported: Raid-0, Raid-1
Display information about a RAID configuration
execute disk raid status show RAID status
Examples
Use the following command to display information about the RAID disk array in a FortiGate-82C.
execute disk raid status
RAID Level: Raid-1
RAID Status: OK
RAID Size: 1000GB
Disk 1: OK Used 1000GB
Disk 2: OK Used 1000GB
Disk 3: OK Used 1000GB
Disk 4: Unavailable Not-Used 0GB