system stp
Use this command to configure Spanning Tree Protocol on an Internal interface switch in switch mode.
config system stp set region-name {string} Set region name. size[31] set config-revision {integer} STP configuration revision (0 - 4294967295, default = 0). range[0-4294967295] set switch-priority {option} STP switch priority; the lower the number the higher the priority (select from 0, 4096, 8192, 12288, 16384, 20480, 24576, 28672, 32768, 36864, 40960, 45056, 49152, 53248, and 57344). 0 0 4096 4096 8192 8192 12288 12288 16384 16384 20480 20480 24576 24576 28672 28672 32768 32768 36864 36864 40960 40960 45056 45056 49152 49152 53248 53248 57344 57344 set hello-time {integer} Hello time (1 - 10 sec, default = 2). range[1-10] set forward-delay {integer} Forward delay (4 - 30 sec, default = 15). range[4-30] set max-age {integer} Maximum packet age (6 - 40 sec, default = 20). range[6-40] set max-hops {integer} Maximum number of hops (1 - 40, default = 20). range[1-40] end