firewall shaper traffic-shaper
Use this command to configure shared traffic shaping that is applied to and shared by all traffic accepted by a firewall policy. As with the per-IP traffic shaper, you select shared traffic shapers in firewall policies.
config firewall shaper traffic-shaper edit {name} # Configure shared traffic shaper. set name {string} Traffic shaper name. size[35] set guaranteed-bandwidth {integer} Amount of bandwidth guaranteed for this shaper (0 - 16776000). Units depend on the bandwidth-unit setting. range[0-16776000] set maximum-bandwidth {integer} Upper bandwidth limit enforced by this shaper (0 - 16776000). 0 means no limit. Units depend on the bandwidth-unit setting. range[0-16776000] set bandwidth-unit {kbps | mbps | gbps} Unit of measurement for guaranteed and maximum bandwidth for this shaper (Kbps, Mbps or Gbps). kbps Kilobits per second. mbps Megabits per second. gbps Gigabits per second. set priority {low | medium | high} Higher priority traffic is more likely to be forwarded without delays and without compromising the guaranteed bandwidth. low Low priority. medium Medium priority. high High priority. set per-policy {disable | enable} Enable/disable applying a separate shaper for each policy. For example, if enabled the guaranteed bandwidth is applied separately for each policy. set diffserv {enable | disable} Enable/disable changing the DiffServ setting applied to traffic accepted by this shaper. set diffservcode {string} DiffServ setting to be applied to traffic accepted by this shaper. next end
Additional information
The following section is for those options that require additional explanation.