webfilter {ips-urlfilter-setting | ips-urlfilter-setting6}
Use this command to configure IPV4 and IPv6 IPS URL filter settings.
Similar entries can be found under both ips-urlfilter-setting and ips-urlfilter-setting6 , so only one CLI syntax is shown. |
History
The following table shows all newly added, changed, or removed entries as of FortiOS 6.0.
Command | Description |
---|---|
config webfilter ips-urlfilter-setting6 |
Configure IPS URL filter settings for IPv6. |
config webfilter {ips-urlfilter-setting | ips-urlfilter-setting6} edit <address> set geo-filter <country name> next end |
Filter based on geographical location. Note that the route will not be installed if the resolved IP address belongs to the country in the filter. |
config webfilter ips-urlfilter-setting set device {string} Interface for this route. size[35] - datasource(s): system.interface.name set distance {integer} Administrative distance (1 - 255) for this route. range[1-255] set gateway {ipv4 address} Gateway IP address for this route. set geo-filter {string} Filter based on geographical location. Route will NOT be installed if the resolved IP address belongs to the country in the filter. size[255] end