hardware nic
Use this command to display hardware and status information about each FortiGate interface. The hardware information includes details such as the driver name and version and chip revision. Status information includes transmitted and received packets, and different types of errors.
Syntax
get hardware nic <interface_name>
Variable | Description |
---|---|
<interface_name> |
A FortiGate interface name such as port1, wan1, internal, etc. |
Example output
get hardware nic wan1
Description :FortiASIC NP6LITE Adapter
Driver Name :FortiASIC NP6LITE Driver
Board :100E
lif id :2
lif oid :66
netdev oid :66
Current_HWaddr 90:6c:ac:c5:25:40
Permanent_HWaddr 90:6c:ac:c5:25:40
========== Link Status ==========
Admin :up
netdev status :down
autonego_setting:1
link_setting :1
speed_setting :10
duplex_setting :0
Speed :0
Duplex :Half
link_status :Down
============ Counters ===========
Rx Pkts :0
Rx Bytes :0
Tx Pkts :0
Tx Bytes :0
Host Rx Pkts :0
Host Rx Bytes :0
Host Tx Pkts :0
Host Tx Bytes :0
Host Tx dropped :0