Flow-based UTM/NGFW inspection identifies and blocks security threats in real time as they are identified using single-pass architecture that involves Direct Filter Approach (DFA) pattern matching to identify possible attacks or threats.
If a FortiGate or a VDOM is configured for flow-based inspection, depending on the options selected in the firewall policy that accepted the session, flow-based inspection can apply IPS, Application Control, Web Filtering, DLP, and AntiVirus. Flow-based inspection is all done by the IPS engine and as you would expect, no proxying is involved.
|Flow-based DLP is supported but not recommended. Flow-based DLP is not available from the GUI, but can be configured from the CLI.|
Before flow-based inspection can be applied the IPS engine uses a series of decoders to determine the appropriate security modules to be applied depending on the protocol of the packet and on policy settings. In addition, if SSL inspection is configured, the IPS engine also decrypts SSL packets. SSL decryption is offloaded and accelerated by CP8 or CP9 processors.
If your configuration includes SSL mirroring, the IPS engine copies decrypted application content, wraps it inside a TCP packet (with IP and ethernet headers), and sends it to the configured mirror interface. The TCP connection tuple is carried over from the original SSL connection. For the Ethernet frame, destination address is broadcast (FF:FF:FF:FF:FF:FF) and source address is all zeros.
All of the applicable flow-based security modules are applied simultaneously in one single pass, and pattern matching is offloaded and accelerated by CP8 or CP9 processors. IPS, Application Control, flow-based Web Filtering and flow-based DLP filtering happen together. Flow-based antivirus caches files during protocol decoding and submits cached files for virus scanning while the other matching is carried out.
Flow-based inspection typically requires less processing resources than proxy-based inspection and since its not a proxy, flow-based inspection does not change packets (unless a threat is found and packets are blocked). Flow-based inspection cannot apply as many features as proxy inspection (for example, flow-based inspection does not support client comforting and some aspects of replacement messages).
IPS and Application Control are only applied using flow-based inspection. Web Filtering, DLP and Antivirus can also be applied using proxy-based inspection.