Fortinet black logo

Handbook

Overview

6.0.0
Copy Link
Copy Doc ID 4afb0436-a998-11e9-81a4-00505692583a:354195
Download PDF

Overview

Endpoint Protection enforces the use of up-to-date FortiClient Endpoint Security software on endpoints (workstation computers and mobile devices). It pushes a FortiClient profile to the FortiClient application, specifying security settings, including:

  • Real-time antivirus protection - on or off
  • FortiClient web category filtering based on web filters defined in a FortiGate Web Filter profile
  • FortiClient Application Control (application firewall) using application sensors defined in the FortiGate Application Control profile

The FortiClient profile can also:

  • Create VPN configurations
  • Install CA certificates
  • Upload logs to FortiAnalyzer or FortiManager
  • Enable use of FortiManager for client software/signature update
  • Enable a dashboard banner
  • Enable client-based logging while on-net
  • Output a mobile configuration profile (.mobileconfig file for iOS)

User experience

When using a web browser, the user of a non-compliant endpoint receives a replacement message HTML page from the FortiGate unit. The message explains that the user needs to install FortiClient Endpoint Security and provides a link to do so. The user cannot continue until the FortiClient software is installed.

For information about modifying the replacement message, see Replacement messages.

Default FortiClient non-compliance message for Windows

After installing FortiClient Endpoint Security, you will receive an invitation to register with the FortiGate unit. If you accept the invitation, the FortiClient profile is sent to the device's FortiClient application. Now the device is compliant and can connect to the network. FortiClient Endpoint Security registered with a FortiGate unit does not need to be separately licensed with FortiGuard.

The FortiGate unit can also register endpoints connecting over the Internet through a VPN. See Registration over a VPN.

Licensing and FortiGate endpoint registration limits

To view the number of endpoints that are registered and the total that can be registered, go to Dashboard. Under Licenses, find FortiClient. You will see text like "4 /10". This means that there are four registered endpoints and a total of ten are allowed.

When the registration limit is reached, the next FortiClient-compatible device will not be able to register with the FortiGate unit. A message appears in the FortiClient application. The FortiClient profile is not sent to client and the client cannot connect through the FortiGate unit.

For all FortiGate models, the maximum number of registered endpoints is ten. For all models except 20C, you can purchase an endpoint license to increase this capacity:

To add an endpoint license - GUI
  1. Go to Dashboard.
  2. In the Licenses widget, click on FortiClient, select Enter License.
  3. Enter the license key in the window that sllides in from the right, and select OK.
Maximum registered endpoints with endpoint license

FortiClient endpoint licenses for FortiOS 5.6.0 can be purchased in multiples of 100. There is a maximum client limit based on the FortiGate's model. FortiCare enforces the maximum limits when the customer is applying the license to a model.

If you are using the ten free licenses for FortiClient, support is provided on the Fortinet Forum (forum.fortinet.com). Phone support is only available for paid licenses.

Model(s)

Maximum client limit

VM00

200

FGT/FWF 30 to 90 series

200

FGT 100 to 400 series

600

FGT 500 to 900 series, VM01, VM02

2,000

FGT 1000 to 2900 series

20,000

FGT 3000 to 3600 series, VM04

50,000

FGT 3700D and above, VM08 and above

100,000

Older FortiClient SKUs will still be valid and can be applied to FortiOS 5.4 and 5.6.

Overview

Endpoint Protection enforces the use of up-to-date FortiClient Endpoint Security software on endpoints (workstation computers and mobile devices). It pushes a FortiClient profile to the FortiClient application, specifying security settings, including:

  • Real-time antivirus protection - on or off
  • FortiClient web category filtering based on web filters defined in a FortiGate Web Filter profile
  • FortiClient Application Control (application firewall) using application sensors defined in the FortiGate Application Control profile

The FortiClient profile can also:

  • Create VPN configurations
  • Install CA certificates
  • Upload logs to FortiAnalyzer or FortiManager
  • Enable use of FortiManager for client software/signature update
  • Enable a dashboard banner
  • Enable client-based logging while on-net
  • Output a mobile configuration profile (.mobileconfig file for iOS)

User experience

When using a web browser, the user of a non-compliant endpoint receives a replacement message HTML page from the FortiGate unit. The message explains that the user needs to install FortiClient Endpoint Security and provides a link to do so. The user cannot continue until the FortiClient software is installed.

For information about modifying the replacement message, see Replacement messages.

Default FortiClient non-compliance message for Windows

After installing FortiClient Endpoint Security, you will receive an invitation to register with the FortiGate unit. If you accept the invitation, the FortiClient profile is sent to the device's FortiClient application. Now the device is compliant and can connect to the network. FortiClient Endpoint Security registered with a FortiGate unit does not need to be separately licensed with FortiGuard.

The FortiGate unit can also register endpoints connecting over the Internet through a VPN. See Registration over a VPN.

Licensing and FortiGate endpoint registration limits

To view the number of endpoints that are registered and the total that can be registered, go to Dashboard. Under Licenses, find FortiClient. You will see text like "4 /10". This means that there are four registered endpoints and a total of ten are allowed.

When the registration limit is reached, the next FortiClient-compatible device will not be able to register with the FortiGate unit. A message appears in the FortiClient application. The FortiClient profile is not sent to client and the client cannot connect through the FortiGate unit.

For all FortiGate models, the maximum number of registered endpoints is ten. For all models except 20C, you can purchase an endpoint license to increase this capacity:

To add an endpoint license - GUI
  1. Go to Dashboard.
  2. In the Licenses widget, click on FortiClient, select Enter License.
  3. Enter the license key in the window that sllides in from the right, and select OK.
Maximum registered endpoints with endpoint license

FortiClient endpoint licenses for FortiOS 5.6.0 can be purchased in multiples of 100. There is a maximum client limit based on the FortiGate's model. FortiCare enforces the maximum limits when the customer is applying the license to a model.

If you are using the ten free licenses for FortiClient, support is provided on the Fortinet Forum (forum.fortinet.com). Phone support is only available for paid licenses.

Model(s)

Maximum client limit

VM00

200

FGT/FWF 30 to 90 series

200

FGT 100 to 400 series

600

FGT 500 to 900 series, VM01, VM02

2,000

FGT 1000 to 2900 series

20,000

FGT 3000 to 3600 series, VM04

50,000

FGT 3700D and above, VM08 and above

100,000

Older FortiClient SKUs will still be valid and can be applied to FortiOS 5.4 and 5.6.