Fortinet black logo

Handbook

Applying MMS protection profiles to MMS traffic

6.0.0
Copy Link
Copy Doc ID 4afb0436-a998-11e9-81a4-00505692583a:121026
Download PDF

Applying MMS protection profiles to MMS traffic

To apply an MMS protection profile you must first create the MMS protection profile and then add the MMS protection profile to a security policy by enabling the Carrier security profile. The MMS protection profile then applies itself to the traffic accepted by that security policy.

MMS protection profiles can contain settings relevant to many different services. Each security policy uses the subset of the MMS protection profile settings that apply to the sessions accepted by the security policy. In this way, you might define just one MMS protection profile that can be used by many security policies, each policy using a different or overlapping subset of the MMS protection profile.

To add an MMS protection profile to a security policy
  1. Go to Security Profiles > MMS Profile.
  2. Select Create New to add an MMS protection profile.
  3. Configure as needed, and save.
  4. Go to Policy & Objects > IPv4 Policy.
  5. Select Create New to add a security policy, or select an existing policy and Edit to add the MMS profile.
  6. Configure the security policy as required.
  7. Enable MMS Profile, and select the MMS profile to add to the security policy.
  8. Select OK.

Applying MMS protection profiles to MMS traffic

To apply an MMS protection profile you must first create the MMS protection profile and then add the MMS protection profile to a security policy by enabling the Carrier security profile. The MMS protection profile then applies itself to the traffic accepted by that security policy.

MMS protection profiles can contain settings relevant to many different services. Each security policy uses the subset of the MMS protection profile settings that apply to the sessions accepted by the security policy. In this way, you might define just one MMS protection profile that can be used by many security policies, each policy using a different or overlapping subset of the MMS protection profile.

To add an MMS protection profile to a security policy
  1. Go to Security Profiles > MMS Profile.
  2. Select Create New to add an MMS protection profile.
  3. Configure as needed, and save.
  4. Go to Policy & Objects > IPv4 Policy.
  5. Select Create New to add a security policy, or select an existing policy and Edit to add the MMS profile.
  6. Configure the security policy as required.
  7. Enable MMS Profile, and select the MMS profile to add to the security policy.
  8. Select OK.