Version:

Version:


Table of Contents

GCP Administration Guide

Download PDF
Copy Link

Enabling dynamic routing mode

You must enable dynamic routing mode on the external VPC of the newly created NCC setup. This ensures that the cloud router dynamically advertises subnets and propagates learned routes in the region where the router is configured or throughout the entire VPC network.

To enable dynamic routing mode:
  1. In the GCP management console, go to Networking > VPC Network > (external_vpc_name) > EDIT.
  2. Under Dynamic routing mode, select Global.
  3. Click SAVE.
  4. Go to the external subnet's ROUTES tab. You should see the new dynamic routes.

Enabling dynamic routing mode

You must enable dynamic routing mode on the external VPC of the newly created NCC setup. This ensures that the cloud router dynamically advertises subnets and propagates learned routes in the region where the router is configured or throughout the entire VPC network.

To enable dynamic routing mode:
  1. In the GCP management console, go to Networking > VPC Network > (external_vpc_name) > EDIT.
  2. Under Dynamic routing mode, select Global.
  3. Click SAVE.
  4. Go to the external subnet's ROUTES tab. You should see the new dynamic routes.