Fortinet Document Library

Version:


Table of Contents

OCI Administration Guide

7.0.0
Download PDF
Copy Link

Initial Fabric connector configuration

First, you must configure a Fabric connector in FortiOS. Calling APIs to OCI during HA failover requires this step.

Follow the steps in Configuring an OCI SDN connector using IAM roles. Ensure you can successfully call APIs to OCI by referring to Troubleshooting OCI SDN connector.

You must ensure that HA status is enabled for the Fabric connector:

config system sdn-connector

edit "oci"

set type oci

set ha-status enable

next

end

You must then configure A-P HA settings by using CLI commands on the GUI or via SSH.

Initial Fabric connector configuration

First, you must configure a Fabric connector in FortiOS. Calling APIs to OCI during HA failover requires this step.

Follow the steps in Configuring an OCI SDN connector using IAM roles. Ensure you can successfully call APIs to OCI by referring to Troubleshooting OCI SDN connector.

You must ensure that HA status is enabled for the Fabric connector:

config system sdn-connector

edit "oci"

set type oci

set ha-status enable

next

end

You must then configure A-P HA settings by using CLI commands on the GUI or via SSH.