Fortinet black logo

OCI Administration Guide

Initial Fabric connector configuration

Copy Link
Copy Doc ID dafbe0b4-44e9-11e9-94bf-00505692583a:985426
Download PDF

Initial Fabric connector configuration

First, you must configure a Fabric connector in FortiOS. This step is required to call APIs to OCI during HA failover.

Follow the steps in Certificate-based Security Fabric connector integration. Ensure you can successfully call APIs to OCI by referring to Troubleshooting OCI Fabric connector.

You must ensure that HA status is enabled for the Fabric connector:

config system sdn-connector

edit "oci"

set type oci

set ha-status enable

next

end

You must then configure A-P HA settings by using CLI commands on the GUI or via SSH.

Initial Fabric connector configuration

First, you must configure a Fabric connector in FortiOS. This step is required to call APIs to OCI during HA failover.

Follow the steps in Certificate-based Security Fabric connector integration. Ensure you can successfully call APIs to OCI by referring to Troubleshooting OCI Fabric connector.

You must ensure that HA status is enabled for the Fabric connector:

config system sdn-connector

edit "oci"

set type oci

set ha-status enable

next

end

You must then configure A-P HA settings by using CLI commands on the GUI or via SSH.