Table of Contents

FortiGate-7121F System Guide

Download PDF
Copy Link

Rebooting an FIM or FPM from the SMC SDI CLI

A common use of the SMC SDI CLI is being able to remotely reboot a FIM or FPM.

From any SMC SDI CLI use the following command to reboot the FPM in slot 3:

mc reset 3 warm

Use the following command to power off the FPM in slot 4:

fru deactivate 4

Use the following command to power on the FIM in slot 2 (IPMI address 0x84):

fru activate 0x84

Rebooting an FIM or FPM from the SMC SDI CLI

A common use of the SMC SDI CLI is being able to remotely reboot a FIM or FPM.

From any SMC SDI CLI use the following command to reboot the FPM in slot 3:

mc reset 3 warm

Use the following command to power off the FPM in slot 4:

fru deactivate 4

Use the following command to power on the FIM in slot 2 (IPMI address 0x84):

fru activate 0x84