Installing AC PSUs
Follow these steps to install an AC PSUs in a FortiGate 7121F chassis.
Install the AC PSUs before connecting them to power. |
- Attach an ESD wrist strap to your wrist and to an ESD socket or to a bare metal surface on the chassis or frame.
- Remove a PSU from its packaging.
- Insert the PSU into a chassis PSU slot and slide it in until it locks into place.
- Repeat to install all of the required PSUs.
-
Plug the power cables into each FortiGate 7121F PSU connectors.
Slide each connector in until the release tab clicks, locking the cable in place.